Asus im Preisvergleich

Asus-90MB0WD0-M0EAY0

ASUS ROG Strix B360-G Gaming

Preis ab 90,00 €4 Anbieter im Preisvergleich

Formfaktor: µATX • Chipsatz: Intel B360 • RAM: 4x DDR4 DIMM, dual PC4-21300U/DDR4-2666, 64.00GB(UDIMM) • Erweiterungsslots: 2x M.2(x2), 2x M-Key(SATA,) • Anschlüsse extern: 1x DVI-D, 1x HDMI 1.4, 2x USB-A 3.1(B360), 2x USB-A 3.0, 2x USB-A 2.0, 1x Gb LAN(Intel I219-V), 5x Klinke, 1x TOSlink, 1x PS/2 Combo • Anschlüsse intern: 2x USB 3.0, 4x USB 2.0, 6x SATA 6Gb/s(B360), 1x seriell, 1x TPM-Header • Header Kühlung: 1x CPU-Lüfter 4-Pin, 2x Lüfter 4-Pin, 1x AIO-Pumpe 4-Pin • Header Beleuchtung: 1x RGB-Header 4-Pin(5050) • Audio: 7.1(Realtek ALC1220/ASUS SupremeFX) • Multi-GPU: AMD 2-Way-CrossFireX(x16/x4) • Stromanschlüsse: 1x 24-Pin ATX, 1x 8-Pin EPS12V • Grafik: IGP(via CPU/APU) • Beleuchtung: rot, 1 Zone(Audio-Signalweg) • Besonderheiten: Audio+solid capacitors • Herstellergarantie: drei Jahre(Abwicklung nur über Händler)

Als PDF Download:

background image

Motherboard

ROG STRIX

B360-G

GAMING

background image

ii

E13783

First Edition

February 2018

Copyright© 2018 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”),

under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software

Licenses. Such software in this product is distributed without any warranty to the extent permitted by the

applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data,

you may obtain it for a period of three years after our last shipment of the product, either

(1) for free by downloading it from https://www.asus.com/support/

or

(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location

where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the

product for which you wish to obtain the corresponding source code and your contact details so that we

can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as

the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source

Software licenses. If however you encounter any problems in obtaining the full corresponding source

code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating

the product and describing the problem (please DO NOT send large attachments such as source code

archives, etc. to this email address).

background image

iii

Contents

Safety information ....................................................................................................... v

About this guide ......................................................................................................... vi

ROG STRIX B360-G GAMING specifications summary ........................................ viii

Package contents ....................................................................................................... xi

Installation tools and components .......................................................................... xii

Chapter 1:

Product Introduction

1.1

Motherboard overview ...............................................................................1-1

1.1.1

Before you proceed .....................................................................1-1

1.1.2

Motherboard layout .....................................................................1-2

1.1.3

Central Processing Unit (CPU) ...................................................1-4

1.1.4

System memory ..........................................................................1-5

1.1.5

Expansion slots ...........................................................................1-7

1.1.6 Jumper ........................................................................................1-9

1.1.7

Internal connectors....................................................................1-10

Chapter 2:

Basic Installation

2.1

Building your PC system ...........................................................................2-1

2.1.1

CPU installation...........................................................................2-1

2.1.2

Cooling system installation..........................................................2-3

2.1.3

Motherboard installation ..............................................................2-5

2.1.4

DIMM installation.........................................................................2-6

2.1.5

ATX power connection ................................................................2-7

2.1.6

SATA device connection .............................................................2-8

2.1.7

Front I/O connector .....................................................................2-9

2.1.8

Expansion card installation .......................................................2-10

2.1.9

M.2 installation ..........................................................................2-11

2.2

Motherboard rear and audio connections .............................................2-12

2.2.1

Rear I/O connection ..................................................................2-12

2.2.2

Audio I/O connections ...............................................................2-14

2.3

Starting up for the first time ....................................................................2-16

2.4

Turning off the computer ........................................................................2-16

background image

iv

Chapter 3:

BIOS Setup

3.1

Knowing BIOS ............................................................................................3-1

3.2

BIOS setup program ..................................................................................3-2

3.2.1

Advanced Mode ..........................................................................3-3

3.2.2

EZ Mode......................................................................................3-6

3.2.3

QFan Control...............................................................................3-7

3.3

My Favorites ...............................................................................................3-9

3.4

Main menu ................................................................................................3-11

3.5

Ai Tweaker menu ......................................................................................3-11

3.6

Advanced menu .......................................................................................3-12

3.6.1

Platform Misc Configuration ......................................................3-12

3.6.2

CPU Configuration ....................................................................3-12

3.6.3

System Agent (SA) Configuration .............................................3-13

3.6.4

PCH Configuration ....................................................................3-13

3.6.5

PCH Storage Configuration.......................................................3-13

3.6.6

PCH-FW Configuration .............................................................3-14

3.6.7

Onboard Devices Configuration ................................................3-14

3.6.8

APM Configuration ....................................................................3-14

3.6.9

USB Configuration ....................................................................3-15

3.6.10

Network Stack Configuration.....................................................3-15

3.6.11

HDD/SSD SMART Information .................................................3-15

3.7

Monitor menu ...........................................................................................3-15

3.8

Boot menu ................................................................................................3-16

3.9

Tool menu .................................................................................................3-17

3.9.1

ASUS EZ Flash 3 Utility ............................................................3-17

3.9.2

ASUS Secure Erase..................................................................3-18

3.9.3

ASUS User Profile.....................................................................3-19

3.9.4

ASUS SPD Information .............................................................3-19

3.9.5

Event Log ..................................................................................3-19

3.9.6

Graphics Card Information ........................................................3-19

3.10

Exit menu ..................................................................................................3-20

3.11

Updating BIOS ..........................................................................................3-20

3.11.1

EZ Update .................................................................................3-20

3.11.2

ASUS EZ Flash 3 ......................................................................3-21

3.11.3

ASUS CrashFree BIOS 3 ..........................................................3-23

Appendix

Notices A-1

ASUS contact information ...................................................................................... A-5

background image

v

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all

power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all the manuals

that came with the package.

• Before using the product, ensure all cables are correctly connected and the power

cables are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualified service

technician or your retailer.

background image

vi

About this guide

This user guide contains the information you need when installing and configuring the

motherboard.

How this guide is organized

This guide contains the following parts:

1.

Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it

supports. It includes description of the switches, jumpers, and connectors on the

motherboard.

2.

Chapter 2: Basic Installation

This chapter lists the hardware setup procedures that you have to perform when

installing system components.

3.

Chapter 3: BIOS Setup

This chapter tells how to change system settings through the BIOS Setup menus.

Detailed descriptions of the BIOS parameters are also provided.

Where to find more information

Refer to the following sources for additional information and for product and software

updates.

1.

ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware

and software products.

2.

Optional documentation

Your product package may include optional documentation, such as warranty flyers,

that may have been added by your dealer. These documents are not part of the

standard package.

background image

vii

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

DANGER/WARNING:

Information to prevent injury to yourself when trying to

complete a task.

CAUTION:

Information to prevent damage to the components when trying to

complete a task.

IMPORTANT:

Instructions that you MUST follow to complete a task.

NOTE:

Tips and additional information to help you complete a task.

Typography

Bold text

Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key>

Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

background image

viii

ROG STRIX B360-G GAMING specifications summary

CPU

Intel

®

Socket 1151 for 8th generation Core Processors

Supports Intel

®

Turbo Boost Technology 2.0*

* Intel

®

Turbo Boost Technology 2.0 support depends on the CPU types

Chipset

Intel

®

B360 Chipset

Memory

4 x DIMM, max. 64GB DDR4 2666 / 2400 / 2133 MHz Non-ECC, Un-

buffered Memory*

Dual channel memory architecture

Supports Intel

®

Extreme Memory Profile (XMP)

* Due to Intel

®

chipset limitation, DDR4 2666MHz memory frequency is only

supported by 8th Generation Intel

®

6-core processors. Higher memory modules

will run at the maximum transfer rate of DDR4 2666MHz.

Graphics

Integrated Graphics Processor- Intel

®

HD Graphics support

Multi-VGA output support : HDMI/DVI ports

- Supports DisplayPort 1.2 with max. resolution 4096 x 2304 @ 60Hz

- Supports HDMI 1.4b with max. resolution 4096 x 2160 @ 30Hz

Maximum shared memory of 1024MB

Multi-GPU

Support

Supports AMD

®

2-Way CrossFireX™ Technology

Expansion slots

1x PCIe 3.0 x16 Safeslot

1 x PCIe 3.0 x 16 slot (max. at x4 mode)

2 x PCIe 3.0 x1 slots

Storage

Intel

®

B360 Chipset

- 6 x SATA 6Gb/s ports

Intel

®

B360 Chipset

- 1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices

support (SATA & PCIE 3.0 x 2 mode)

- 1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices

support (PCIE 3.0 x 4 mode)*

- Ready for Intel

®

Optane Memory*

* Before using Intel

®

Optane memory modules, ensure that you have updated your

motherboard drivers and BIOS to the latest version from ASUS support website.

LAN

1 x Intel

®

I219-V Gigabit LAN- Dual interconnect between the integrated

Media Access Controller (MAC) and physical layer (PHY)

Anti-surge LANGuard

(continued on the next page)

background image

ix

(continued on the next page)

ROG STRIX B360-G GAMING specifications summary

Audio

ROG SupremeFX S1220A Codec

- Dual OP Amplifiers

- Impedance sense for front and rear headphone outputs

- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking

- High quality 120 dB SNR stereo playback output and 113 dB SNR

recording input

- SupremeFX Shielding Technology

Audio Feature:

- LED-lit Audio Shielding: Ensures precision analog/digital separation and

greatly reduced multi-lateral interference, with a gorgeous illuminated trace

path

- Premium Japan-made audio capacitors provides warm, natural, and

immersive sound with exceptional clarity and fidelity

- Optical S/PDIF out port(s) at back panel

- Sonic Radar III

- Sonic Studio III

USB

Intel

®

B360 Chipset

- 2 x USB 3.1 Gen 2 ports ( 2 ports at back panel [red])

- 4 x USB 3.1 Gen 1 ports (2 ports at mid-board [black])

- 6 x USB 2.0 ports( 4 ports at mid-board)

ASUS Special

Features

Gamer’s Guardian:

- ESD Guards on LAN, Audio, KBMS and USB3.1 Gen 1/2.0 ports

- DRAM Overcurrent Protection

- Stainless Steel Back I/O

- Highly Durable Components

- DIGI+ VRM

- SafeSlot

GPU Boost

ASUS Exclusive Features:

- AI Suite 3

- ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface

- ASUS Aura lighting control

ASUS EZ DIY:

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 3

- ASUS MyLogo

ASUS Q-Design:

- ASUS Q-Slot

- ASUS Q-DIMM

Pre-mounted I/O Shield

Fan Xpert 4 CORE

background image

x

ROG STRIX B360-G GAMING specifications summary

Back I/O Ports

1 x PS/2 keyboard/mouse combo port

2 x USB 2.0 ports

1 x DVI port

1 x HDMI 1.4b port

2 x USB 3.1 Gen 2 ports (2 x Type-A [Red])

1 x LAN (RJ45) port

2 x USB 3.1 Gen 1 ports

1 x Optical S/PDIF out

5 x Gold-plated audio jacks

Internal I/O

Ports

1 x AAFP connector

1 x 4-pin RGB Header

1 x USB 3.1 Gen 1 connector supports additional 2 x USB 3.1 Gen 1 ports

2 x USB 2.0 connectors supports additional 4 x USB 2.0 ports

1 x M.2 Socket 3 with M key, type 2242/2260/2280 storage devices support

(SATA & PCIE 3.0 x 2 mode)

1 x M.2 Socket 3 with M key, type 2242/2260/2280storage devices support

(PCIE 3.0 x 4 mode)

1 x TPM connector

1 x COM port connector

6 x SATA 6Gb/s connectors

1 x AIO_Pump connector

1 x CPU Fan connector

1 x Chassis Fan connector

1 x 8-pin EATX 12 V Power connector

1 x 24-pin EATX Power connector

1 x Clear CMOS jumper

1 x System panel connector

BIOS

1 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.0, ACPI

6.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F6 Qfan

Control, F3 My Favorites, Last Modified log, F12 PrintScreen and ASUS

DRAM SPD (Serial Presence Detect) memory information, ASUS Secure

Erase, ASUS User Profile, F4 AURA ON/OFF, F9 Search

Manageability

WOL, WOR, PXE

Software

Drivers

EZ Update

Anti-virus software (OEM version)

ASUS Utilities

Operating

system support

Windows

®

10 64-bit

Form factor

Micro ATX Form Factor 9.6 inch x 9.6 inch ( 24.4 cm x 24.4 cm )

Specifications are subject to change without notice. Please refer to the ASUS website for

the latest specifications.

background image

xi

Package contents

Check your motherboard package for the following items.

Motherboard

1 x ROG STRIX B360-G GAMING motherboard

Cables

1 x 2-in-1 SATA 6Gb/s cables

Accessories

1 x Cable Tie black

1 x ROG Strix Series sticker

1 x ROG Strix Series Door Hanger

1 x M.2 Screws Package

Application drive

1 x ROG motherboard support DVD

Documentation

1 x User guide

If any of the above items is damaged or missing, contact your retailer.

background image

xii

Installation tools and components

The tools and components listed above are not included in the motherboard package.

PC chassis

Power supply unit

Intel

®

1151 compatible CPU Fan

Intel

®

1151 CPU

DIMM

SATA hard disk drive

Graphics card

Phillips (cross) screwdriver

SATA optical disc drive (optional)

1 bag of screws

background image

ROG STRIX B360-G GAMING

1-1

Chapter 1

Product Introduction

1

Chapter 1:

Product Introduction

Unplug the power cord from the wall socket before touching any component.

Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, or components.

1.1

Motherboard overview

1.1.1

Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

background image

1-2

Chapter 1: Product Introduction

Chapter 1

Refer to 1.1.7 Internal connectors and 2.2.1 Rear I/O connection for more information

about rear panel connectors and internal connectors.

1.1.2

Motherboard layout

background image

ROG STRIX B360-G GAMING

1-3

Chapter 1

Layout contents

Connectors/Jumpers/Slots

Page

1.

ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)

1-16

2.

LGA1151 CPU socket

1-4

3.

Fan and pump connectors (4-pin CPU_FAN; 4-pin AIO_PUMP; 4-pin

CHA_FAN1-2)

1-15

4.

DDR4 DIMM slots

1-5

5.

Intel

®

Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6)

1-10

6.

USB 3.1 Gen 1 connector (20-1 pin U31G1_56)

1-13

7.

M.2 sockets (M.2_1; M.2_2)

1-12

8.

System panel connector (20-3 pin PANEL)

1-17

9.

Clear RTC RAM jumper (2-pin CLRTC)

1-9

10. USB 2.0 connectors (10-1 pin USB78, USB1114)

1-13

11. TPM connector (14-1 pin TPM)

1-12

12. Serial port connector (10-1 pin COM)

1-11

13. AURA RGB header (4-pin RGB_HEADER)

1-14

14. Front panel audio connector (10-1 pin AAFP)

1-11

background image

1-4

Chapter 1: Product Introduction

Chapter 1

1.1.3

Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1151 socket designed for the 8th

Generation Intel

®

Core™ processor.

Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install

a CPU designed for LGA1150, LGA1155 and LGA1156 sockets in the LGA1151 socket.

Ensure that all power cables are unplugged before installing the CPU.

Upon purchase of the motherboard, ensure that the PnP cap is on the socket and

the socket contacts are not bent. Contact your retailer immediately if the PnP cap

is missing, or if you see any damage to the PnP cap/socket contacts/motherboard

components. ASUS will shoulder the cost of repair only if the damage is shipment/

transit-related.

Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1151 socket.

The product warranty does not cover damage to the socket contacts resulting from

incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP

cap.

background image

ROG STRIX B360-G GAMING

1-5

Chapter 1

Recommended memory configurations

1.1.4

System memory

The motherboard comes with four DDR4 (Double Data Rate 4) Quad Inline Memory Modules

(DIMM) slots.

A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT

install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

The recommended memory DIMM slots are marked with an asterix (*).

background image

1-6

Chapter 1: Product Introduction

Chapter 1

Memory configurations

You may install 1 GB, 2 GB, 4 GB, 8 GB and 16 GB unbuffered and non-ECC DDR4 DIMMs

into the DIMM sockets.

You may install varying memory sizes in Channel A and Channel B. The system maps the

total size of the lower-sized channel for the dual-channel configuration. Any excess memory

from the higher-sized channel is then mapped for single-channel operation.

The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value.

For system stability, use a more efficient memory cooling system to support a full

memory load (4 DIMMs) or overclocking condition.

Always install the DIMMS with the same CAS Latency. For an optimum compatibility,

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

background image

ROG STRIX B360-G GAMING

1-7

Chapter 1

1.1.5

Expansion slots

Unplug the power cord before adding or removing expansion cards. Failure to do so may

cause you physical injury and damage motherboard components.

Slot No. Slot Description

1

PCIEX16_1 slot

2

PCIEX1_1 slot

3

PCIEX1_2 slot

4

PCIEX16_2 slot

background image

1-8

Chapter 1: Product Introduction

Chapter 1

We recommend that you provide sufficient power when running CrossFireX™ mode.

Connect a chassis fan to the motherboard connector labeled CHA_FAN1-2 when

using multiple graphics cards for better thermal environment.

IRQ assignments for this motherboard

A

B

C

D

E

F

G

H

PCIEX16_1

shared

-

-

-

-

-

-

-

PCIEX1_1

-

-

shared

-

-

-

-

-

PCIEX1_2

-

-

shared

-

-

-

-

-

PCIEX16_2

shared

-

-

-

-

-

-

-

M.2_1

shared

-

-

-

-

-

-

-

M.2_2

shared

-

-

-

-

-

-

-

Intel LAN I219V

-

-

-

shared

-

-

-

-

XHCI Controller

-

-

-

shared

-

-

-

-

IGFX

shared

-

-

-

-

-

-

-

LpcBridge

shared

-

-

-

-

-

-

-

SATA Controller

shared

-

-

-

-

-

-

-

High Definition Audio

shared

-

-

-

-

-

-

-

SMBus

shared

-

-

-

-

-

-

-

Gbe Controller

shared

-

-

-

-

-

-

-

CNVi WiFir Controller

shared

-

-

-

-

-

-

-

ME

shared

-

-

-

-

-

-

-

VGA configuration

PCI Express 3.0 operating mode

PCIEX16_1

PCIEX16_2

Single VGA/PCIe card

x16 (single VGA

recommended)

x4

background image

ROG STRIX B360-G GAMING

1-9

Chapter 1

1.1.6 Jumper

1.

Clear RTC RAM jumper (2-pin CLRTC)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can

clear the CMOS memory of date, time, and system setup parameters by erasing the

CMOS RTC RAM data. The onboard button cell battery powers the RAM data in

CMOS, which include system setup information such as system passwords.

To erase the RTC RAM:

1.

Turn OFF the computer and unplug the power cord.

2.

Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.

3.

Plug the power cord and turn ON the computer.

4.

Hold down the <Delete> key during the boot process and enter BIOS setup to re-enter

data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default

position. Removing the cap will cause system boot failure!

If the steps above do not help, remove the onboard battery and move the jumper

again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the

battery.

You do not need to clear the RTC when the system hangs due to overclocking. For

system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.

Shut down and reboot the system so the BIOS can automatically reset parameter

settings to default values.

Due to the chipset behavior, AC power off is required to enable C.P.R. function. You

must turn off and on the power supply or unplug and plug the power cord before

rebooting the system.

background image

1-10

Chapter 1: Product Introduction

Chapter 1

1.1.7

Internal connectors

1. Intel

®

Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6)

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.

background image

ROG STRIX B360-G GAMING

1-11

Chapter 1

2.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

HD Audio standard. Connect one end of the front panel audio I/O module cable to this

connector.

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

3.

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

background image

1-12

Chapter 1: Product Introduction

Chapter 1

4.

TPM connector (14-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which securely

stores keys, digital certificates, passwords and data. A TPM system also helps

enhance network security, protect digital identities, and ensures platform integrity.

The TPM module is purchased separately.

5.

M.2 socket (M.2_1; M.2_2)

These sockets allow you to install M.2 SSD modules.

M.2_1 socket supports PCIe 3.0 x2 and SATA mode M Key design and type 2242 /

2260 / 2280 PCIe and SATA storage devices.

M.2_2 socket supports PCIe 3.0 x4 M Key design and type 2242 / 2260 / 2280 PCIe

storage devices.

M.2_2 socket supports IRST (Intel

®

Rapid Storage Technology) and Intel

®

Optane

Memory.

The M.2 SSD module is purchased separately.

background image

ROG STRIX B360-G GAMING

1-13

Chapter 1

7.

USB 3.1 Gen 1 connectors (20-1 pin U31G1_56)

These connectors allow you to connect a USB 3.1 Gen 1 module for additional USB

3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can

enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to

5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency,

and backward compatibility with USB 2.0.

DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

The USB 2.0 module is purchased separately.

6.

USB 2.0 connector (10-1 pin USB910, USB1114)

This connector is for USB 2.0 ports. Connect the USB module cable to these

connectors, then install the module to a slot opening at the back of the system chassis.

This USB connector complies with USB 2.0 specification that supports up to 480 Mb/s

connection speed.

The USB 3.1 Gen 1 module is purchased separately.

background image

1-14

Chapter 1: Product Introduction

Chapter 1

The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum

power rating of 3A (12V), and no longer than 3 m.

Before you install or remove any component, ensure that the ATX power supply is switched

off or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

Actual lighting and color will vary with LED strip.

If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip is connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

The LED strip will only light up when the system is operating.

The LED strip is purchased separately.

8.

AURA RGB headers (4-pin RGB_HEADER)

This connector is for RGB LED strips.

background image

ROG STRIX B360-G GAMING

1-15

Chapter 1

9.

Fan and pump connectors (4-pin CPU_FAN; 4-pin AIO_PUMP; 4-pin CHA_FAN1-2)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components. These are not jumpers!

Do not place jumper caps on the fan connectors!

Ensure that the CPU fan cable is securely installed to the CPU fan connector.

Connect the pump cable from the all-in-one cooler (AIO cooler) to the AIO_PUMP header,

and connect the fan cables to the CPU_FAN and CHA_fan1 headers.

background image

1-16

Chapter 1: Product Introduction

Chapter 1

For a fully configured system, we recommend that you use a power supply unit

(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a

minimum power of 350 W.

DO NOT forget to connect the 8-pin EATX12V power plug. Otherwise, the system will

not boot.

We recommend that you use a PSU with a higher power output when configuring a

system with more power-consuming devices. The system may become unstable or

may not boot up if the power is inadequate.

If you want to use two or more high-end PCI Express x16 cards, use a PSU with

1000W power or above to ensure the system stability.

10. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation and

push down firmly until the connectors completely fit.

background image

ROG STRIX B360-G GAMING

1-17

Chapter 1

System power LED (2-pin or 3-1 pin PLED)

The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis

power LED cable to this connector. The system power LED lights up when you turn on

the system power, and blinks when the system is in sleep mode.

Hard disk drive activity LED (2-pin HDD_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable

to this connector. The HDD LED lights up or flashes when data is read from or written

to the HDD.

System warning speaker (4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning speaker. The speaker

allows you to hear system beeps and warnings.

ATX power button/soft-off button (2-pin PWRSW)

This connector is for the system power button. Pressing the power button turns the

system on or puts the system in sleep or soft-off mode depending on the operating

system settings. Pressing the power switch for more than four seconds while the

system is ON turns the system OFF.

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without

turning off the system power.

11. System panel connector (20-3 pin PANEL)

This connector supports several chassis-mounted functions.

background image

1-18

Chapter 1: Product Introduction

Chapter 1

background image

ROG STRIX B360-G GAMING

2-1

Chapter 2

Basic Installation

2

2.1

Building your PC system

The diagrams in this section are for reference only. The motherboard layout may vary with

models, but the installation steps are the same for all models.

Chapter 2:

Basic Installation

2.1.1

CPU installation

Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install

a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket.

background image

2-2

Chapter 2: Basic Installation

Chapter 2

background image

ROG STRIX B360-G GAMING

2-3

Chapter 2

2.1.2

Cooling system installation

Apply the Thermal Interface Material to the

CPU cooling system and CPU before you

install the cooling system, if necessary.

To install the CPU heatsink and fan assembly

background image

2-4

Chapter 2: Basic Installation

Chapter 2

To install an AIO cooler

AIO_PUMP

CHA_FAN1

CPU_FAN

background image

ROG STRIX B360-G GAMING

2-5

Chapter 2

DO NOT overtighten the screws! Doing so can damage the motherboard.

2.

Place eight (8) screws into the holes indicated by circles to secure the motherboard to

the chassis.

1.

Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to

the chassis’ rear I/O panel.

2.1.3

Motherboard installation

background image

2-6

Chapter 2: Basic Installation

Chapter 2

To remove a DIMM

2.1.4

DIMM installation

background image

ROG STRIX B360-G GAMING

2-7

Chapter 2

2.1.5

ATX power connection

Ensure to connect the 8-pin power plug.

background image

2-8

Chapter 2: Basic Installation

Chapter 2

2.1.6

SATA device connection

OR

OR

background image

ROG STRIX B360-G GAMING

2-9

Chapter 2

2.1.7

Front I/O connector

USB 2.0

AAFP

To install USB 2.0 connector

To install front panel audio connector

USB 3.1 Gen 1

To install USB 3.1 Gen 1 connector

To install front panel connector

background image

2-10

Chapter 2: Basic Installation

Chapter 2

2.1.8

Expansion card installation

To install PCIe x16 cards

To install PCIe x1 cards

background image

ROG STRIX B360-G GAMING

2-11

Chapter 2

2.1.9

M.2 installation

background image

2-12

Chapter 2: Basic Installation

Chapter 2

2.2

Motherboard rear and audio connections

2.2.1

Rear I/O connection

Rear panel connectors

1.

PS/2 keyboard/mouse combo port

6.

HDMI port

2.

DVI-D port

7.

USB 3.1 Gen 1 port 34

3.

USB 3.1 Gen 2 Type-A port 12

8.

Optical S/PDIF Out port

4.

LAN (RJ-45) port*

9.

Audio I/O ports**

5.

USB 2.0 ports 910

* and ** : Refer to the tables on the next page for LAN port LEDs and audio port definitions.

USB 3.1 Gen 1/Gen 2 devices can only be used as data storage only.

We strongly recommend that you connect your devices to ports with matching data

transfer rate. Please connect your USB 3.1 Gen 2 devices to USB 3.1 Gen 2 ports for

faster and better performance for your devices.

background image

ROG STRIX B360-G GAMING

2-13

Chapter 2

* LAN ports LED indications

ACT/LINK

LED

SPEED

LED

LAN port

Activity Link LED

Speed LED

Status

Description

Status Description

Off

No link

Off

10 Mbps connection

Orange

Linked

Orange 100 Mbps connection

Orange (Blinking) Data activity

Green

1 Gbps connection

Orange (Blinking

then steady)

Ready to wake up

from S5 mode

** Audio 2, 4, 5.1, or 7.1-channel configuration

Port

Headset

2-channel

4-channel

5.1-channel

7.1-channel

Light Blue

Line In

Line In

Line In

Side speaker

Lime

Line Out

Front Speaker Out Front Speaker Out Front Speaker Out

Pink

Mic In

Mic In

Mic In

Mic In

Orange

Center/Subwoofer

Center/Subwoofer

Black

Rear Speaker Out

Rear Speaker Out

Rear Speaker Out

background image

2-14

Chapter 2: Basic Installation

Chapter 2

Connect to Headphone and Mic

Connect to Stereo Speakers

2.2.2

Audio I/O connections

Audio I/O ports

Connect to 2-channel Speakers

background image

ROG STRIX B360-G GAMING

2-15

Chapter 2

Connect to 4-channel Speakers

Connect to 5.1-channel Speakers

Connect to 7.1-channel Speakers

background image

2-16

Chapter 2: Basic Installation

Chapter 2

2.3

Starting up for the first time

1.

After making all the connections, replace the system case cover.

2.

Ensure that all switches are off.

3.

Connect the power cord to the power connector at the back of the system chassis.

4.

Connect the power cord to a power outlet that is equipped with a surge protector.

5.

Turn on the devices in the following order:

a. Monitor

b. External storage devices (starting with the last device on the chain)

c. System power

6.

After applying power, the system power LED on the system front panel case lights up.

For systems with ATX power supplies, the system LED lights up when you press the

ATX power button. If your monitor complies with the “green” standards or if it has a

“power standby” feature, the monitor LED may light up or change from orange to green

after the system LED turns on.

The system then runs the power-on self tests (POST). While the tests are running, the

BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on

the screen. If you do not see anything within 30 seconds from the time you turned on

the power, the system may have failed a power-on test. Check the jumper settings and

connections or call your retailer for assistance.

BIOS Beep

Description

One short beep

VGA detected

Quick boot set to disabled

No keyboard detected

One continuous beep followed by two

short beeps then a pause (repeated)

No memory detected

One continuous beep followed by three

short beeps

No VGA detected

One continuous beep followed by four

short beeps

Hardware component failure

7.

At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the

instructions in Chapter 3.

2.4

Turning off the computer

While the system is ON, press the power button for less than four seconds to put the system

on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch

for more than four seconds to let the system enter the soft-off mode regardless of the BIOS

setting.

background image

ROG STRIX B360-G GAMING

3-1

Chapter 3

BIOS Setup

3

3.1

Knowing BIOS

The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI

architecture, offering a user-friendly interface that goes beyond the traditional keyboard-

only BIOS controls to enable a more flexible and convenient mouse input. You can easily

navigate the new UEFI BIOS with the same smoothness as your operating system. The

term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.

BIOS (Basic Input and Output System) stores system hardware settings such as storage

device configuration, overclocking settings, advanced power management, and boot

device configuration that are needed for system startup in the motherboard CMOS. In

normal circumstances, the default BIOS settings apply to most conditions to ensure

optimal performance. DO NOT change the default BIOS settings except in the following

circumstances:

• An error message appears on the screen during the system bootup and requests you to

run the BIOS Setup.

• You have installed a new system component that requires further BIOS settings or

update.

Inappropriate BIOS settings may result to instability or boot failure. We strongly

recommend that you change the BIOS settings only with the help of a trained service

personnel

.

When downloading or updating the BIOS file, rename it as SB360GG.CAP for this

motherboard.

Chapter 3:

BIOS Setup

background image

3-2

Chapter 3: BIOS Setup

Chapter 3

The BIOS setup screens shown in this section are for reference purposes only, and

may not exactly match what you see on your screen.

Ensure that a USB mouse is connected to your motherboard if you want to use the

mouse to control the BIOS setup program.

If the system becomes unstable after changing any BIOS setting, load the default

settings to ensure system compatibility and stability. Select the Load Optimized

Defaults

item under the Exit menu or press hotkey <F5>. See section 3.10 Exit Menu

for details.

If the system fails to boot after changing any BIOS setting, try to clear the CMOS and

reset the motherboard to the default value. See section 1.1.6 Jumpers and holes for

information on how to erase the RTC RAM via the Clear CMOS jumper.

The BIOS setup program does not support the Bluetooth devices.

Please visit ASUS website for the detailed BIOS content manual.

BIOS menu screen

The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.

You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.

3.2

BIOS setup program

Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen

include navigation keys and brief onscreen help to guide you in using the BIOS Setup

program.

Entering BIOS at startup

To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test

(POST). If you do not press <Delete> or <F2>, POST continues with its routines.

Entering BIOS Setup after POST

To enter BIOS Setup after POST:

Press <Ctrl>+<Alt>+<Delete> simultaneously.

Press the reset button on the system chassis.

Press the power button to turn the system off then back on. Do this option only if you

failed to enter BIOS Setup using the first two options.

After doing either of the three options, press <Delete> key to enter BIOS.

background image

ROG STRIX B360-G GAMING

3-3

Chapter 3

3.2.1

Advanced Mode

The Advanced Mode provides advanced options for experienced end-users to configure

the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the

following sections for the detailed configurations.

The default screen for entering the BIOS setup program can be changed. Refer to the

Setup Mode

item in section Boot menu for details.

Menu items

General help

Menu bar

Language

MyFavorite(F3)

Pop-up Menu

Configuration fields

Displays a quick overview

of the system status

Search on the FAQ

Qfan Control(F6)

Scroll bar

AURA ON/OFF(F4)

Search(F9)

Hot Keys

Last modified settings

Go back to EZ Mode

background image

3-4

Chapter 3: BIOS Setup

Chapter 3

Menu bar

The menu bar on top of the screen has the following main items:

My Favorites

For saving the frequently-used system settings and configuration.

Main

For changing the basic system configuration

Ai Tweaker

For changing the overclocking settings

Advanced

For changing the advanced system settings

Monitor

For displaying the system temperature, power status, and changing

the fan settings.

Boot

For changing the system boot configuration

Tool

For configuring options for special functions

Exit

For selecting the exit options and loading default settings

Menu items

The highlighted item on the menu bar displays the specific items for that menu. For example,

selecting Main shows the Main menu items.

The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the

menu bar have their respective menu items.

Submenu items

A greater than sign (>) before each item on any menu screen means that the item has a

submenu. To display the submenu, select the item and press <Enter>.

Language

This button above the menu bar contains the languages that you can select for your BIOS.

Click this button to select the language that you want to display in your BIOS screen.

My Favorites(F3)

This button above the menu bar shows all BIOS items in a Tree Map setup. Select frequently-

used BIOS settings and save it to MyFavorites menu.

Refer to section 3.3 My Favorites for more information.

Q-Fan Control(F6)

This button above the menu bar displays the current settings of your fans. Use this button to

manually tweak the fans to your desired settings.

Refer to section 3.2.3 QFan Control for more information.

Search (F9)

This button allows you to search for BIOS items by entering its name, enter the item name to

find the related item listing.

background image

ROG STRIX B360-G GAMING

3-5

Chapter 3

AURA (F4)

This button allows you to turn the RGB LED lighting or functional LED on or off.

[ON]

All AURA effects will be enabled. (Default mode)

[OFF]

All AURA effects will be disabled.

[Stealth Mode] Functional LEDs (Q-Code and HDD_LED) and all AURA effects will be

disabled.

Search on FAQ

Move your mouse over this button to show a QR code, scan this QR code on your mobile

device to connect to the BIOS FAQ web page of the ASUS support website. You can also

scan the following QR code:

Scroll bar

A scroll bar appears on the right side of a menu screen when there are items that do not fit

on the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display

the other items on the screen.

General help

At the bottom of the menu screen is a brief description of the selected item. Use <F12> key

to capture the BIOS screen and save it to the removable storage device.

Configuration fields

These fields show the values for the menu items. If an item is user-configurable, you can

change the value of the field opposite the item. You cannot select an item that is not user-

configurable.

A configurable field is highlighted when selected. To change the value of a field, select it and

press <Enter> to display a list of options.

Hot keys

This button contains the navigation keys for the BIOS setup program. Use the navigation

keys to select items in the menu and change the settings.

Last Modified button

This button shows the items that you last modified and saved in BIOS Setup.

background image

3-6

Chapter 3: BIOS Setup

Chapter 3

3.2.2

EZ Mode

The EZ Mode provides you an overview of the basic system information, and allows you to

select the display language, system performance, mode and boot device priority. To access

the Advanced Mode, select Advanced Mode or press the <F7> hotkey

for the advanced

BIOS settings.

To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the <F7> hotkey.

The boot device options vary depending on the devices you installed to the system.

Displays the system properties of the selected mode.

Click < or > to switch EZ System Tuning modes

Loads optimized

default settings

Displays the CPU Fan’s speed. Click

the button to manually tune the fans

Enables or disables

Intel Rapid Storage Technology

Saves the changes

and resets the system

Click to display boot devices

Selects the boot device priority

Click to go to Advanced mode

Search on the FAQ

Selects the display language

of the BIOS setup program

Search(F9)

AURA ON/OFF(F4)

Displays a quick overview

of the system status

background image

ROG STRIX B360-G GAMING

3-7

Chapter 3

3.2.3

QFan Control

The QFan Control allows you to set a fan profile or manually configure the operating speed of

your CPU and chassis fans.

Click to select a fan to be

configured

Click to activate

PWM Mode

Click to undo the

changes

Click to apply the fan setting

Click to go back to main menu

Select a profile to

apply to your fans

Click to activate DC Mode

Select to manually configure

your fans

background image

3-8

Chapter 3: BIOS Setup

Chapter 3

Configuring fans manually

Select Manual from the list of profiles to manually configure your fans’ operating speed.

To configure your fans:

1.

Select the fan that you want to configure and to view its current status.

2.

Click and drag the speed points to adjust the fans’ operating speed.

3.

Click Apply to save the changes then click Exit (ESC).

Speed points

Select to manually

configure your fans

background image

ROG STRIX B360-G GAMING

3-9

Chapter 3

3.3

My Favorites

My Favorites is your personal space where you can easily save and access your favorite

BIOS items.

My Favorites comes with several performance, power saving, and fast boot related items by

default. You can personalize this screen by adding or removing items.

background image

3-10

Chapter 3: BIOS Setup

Chapter 3

Adding items to My Favorites

To add BIOS items:

1.

Press <F3> on your keyboard or click

from the BIOS screen to open

Setup Tree Map screen.

2.

On the Setup Tree Map screen, select the BIOS items that you want to save in My

Favorites screen.

3.

Select an item from main menu panel, then click the submenu that you want to save as

favorite from the submenu panel and click

or press <Enter> on your keyboard.

You cannot add the following items to My Favorite items:

Items with submenu options

User-managed items such as language and boot order

Configuration items such as Memory SPD Information, system time and date.

4.

Click Exit (ESC) or press <Esc> key to close Setup Tree Map screen.

5.

Go to My Favorites menu to view the saved BIOS items.

Main menu panel

Submenu panel

Selected shortcut

items

Delete all favorite

items

Recover to default

favorite items

background image

ROG STRIX B360-G GAMING

3-11

Chapter 3

3.4

Main menu

The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup

program. The Main menu provides you an overview of the basic system information, and

allows you to set the system date, time, language, and security settings.

Security

The Security menu items allow you to change the system security settings.

If you have forgotten your BIOS password, erase the CMOS Real Time Clock

(RTC) RAM to clear the BIOS password. See section 1.1.6 Jumper and holes for

information on how to erase the RTC RAM via the Clear RTC RAM jumper.

The Administrator or User Password items on top of the screen show the default [Not

Installed]

. After you set a password, these items show [Installed].

3.5

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.

Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field

values can cause the system to malfunction

The configuration options for this section vary depending on the CPU and DIMM model you

installed on the motherboard.

Ai Overclock Tuner

Allows you to select the CPU overclocking options to achieve the desired CPU internal

frequency.

[Auto]

Loads the optimal settings for the system.

[X.M.P.]

If you install memory modules supporting the eXtreme Memory Profile

(X.M.P.) Technology, choose this item to set the profiles supported by your

memory modules for optimizing the system performance.

The [X.M.P.] configuration option appears only when you install memory modules

supporting the eXtreme Memory Profile(X.M.P.) Technology.

CPU Core Ratio

This item allows you to set the CPU core ratios.

Configuration options: [Auto] [Sync All Cores] [Per Core]

DRAM Frequency

This item allows you to set the memory operating frequency. The configurable options vary

with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized

setting.

Configuration options: [Auto] [DDR4-800MHz] - [DDR4-8533MHz]

background image

3-12

Chapter 3: BIOS Setup

Chapter 3

Internal CPU Power Management

The subitems in this menu allow you to set the CPU ratio and features.

Intel(R) SpeedStep(tm)

Allows the operating system to dynamically adjust the processor voltage and cores

frequency to decrease the average power consumption and decrease average heat

production.

Configuration options: [Auto] [Enabled] [Disabled]

Turbo Mode

Allows you to enable your processor cores to run faster than the base operating

frequency when it is below power, current and specification limit.

Configuration options: [Disabled] [Enabled]

3.6

Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other system

devices.

Be cautious when changing the settings of the Advanced menu items. Incorrect field values

can cause the system to malfunction.

3.6.2

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects.

The items in this menu may vary based on the CPU installed.

CPU - Power Management Control

This item allows you to manage and configure the CPU’s power.

Intel(R) SpeedStep(tm)

This item allows more than two frequency to be supported.

Configuration options: [Auto] [Disabled] [Enabled]

Turbo Mode

This item allows you to automatically set the CPU cores to run faster than the base

operating frequency when it is below the operating power, current and temperature

specification limit.

Configuration options: [Disabled] [Enabled]

CPU C-states

This item allows you to set the power saving of the CPU states.

Configuration options: [Auto] [Disabled] [Enabled]

3.6.1

Platform Misc Configuration

The items in this menu allow you to change the ASPM for PCH and SA PCI Express.

background image

ROG STRIX B360-G GAMING

3-13

Chapter 3

PCI Express Configuration

This item allows you to configure the PCI Express slots.

PCIe Speed

This item allows your system to automatically select the PCI Express port speed.

Configuration options: [Auto] [Gen1] [Gen2] [Gen3]

3.6.5

PCH Storage Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The

SATA Port items show Not Present if no SATA device is installed to the corresponding SATA

port.

SATA Controller(s)

This item allows you to enable or disable the SATA Device.

Configuration options: [Enabled] [Disabled]

The following items appear only when SATA Controller(s) is set to [Enabled].

SATA Mode Selection

This item allows you to set the SATA configuration.

[AHCI]

Set to [AHCI] when you want the SATA hard disk drives to

use the AHCI (Advanced Host Controller Interface). The

AHCI allows the onboard storage driver to enable advanced

Serial ATA features that increases storage performance

on random workloads by allowing the drive to internally

optimize the order of commands.

[ Intel RST With Intel Optane

System Acceleration]

Set to [Intel RST With Intel Optane System Acceleration]

when you want to enable the Intel Optane System

Acceleration.

3.6.3

System Agent (SA) Configuration

The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor.

3.6.4

PCH Configuration

The items in this menu allow you to adjust the PCH PCI Express speed.

SMART Self Test

SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that

shows a warning message during POST (Power-on Self Test) when an error occurs in the

hard disks.

Configuration options: [On] [Off]

background image

3-14

Chapter 3: BIOS Setup

Chapter 3

SATA6G_1(Black) - SATA6G_6(Black)

SATA6G_1(Black) - SATA6G_6(Black)

This item allows you to enable or disable the selected SATA port.

Configuration options: [Disabled] [Enabled]

Hot Plug

These items appears only when the SATA Mode Selection is set to [AHCI] and allows

you to enable or disable SATA Hot Plug Support.

Configuration options: [Disabled] [Enabled]

3.6.7

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard

devices.

HD Audio

This item allows you to use the Azalia High Definition Audio Controller.

Configuration options: [Disabled] [Enabled]

Intel LAN Controller

This item allows you to enable or disable the Intel LAN controllers.

Configuration options: [Disabled] [Enabled]

RGB LED lighting

When system is in working state

This item allows you to turn the RGB LED lighting on or off when the system is in the

working state.

Configuration options: [On] [Off]

3.6.8

APM Configuration

The items in this menu allow you to set system wake and sleep settings.

ErP Ready

This item allows you to switch off some power at S4+S5 or S5 to get the system ready for

ErP requirement. When set to [Enabled], all other PME options are switched off.

Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]

3.6.6

PCH-FW Configuration

This item allows you to configure the firmware TPM.

background image

ROG STRIX B360-G GAMING

3-15

Chapter 3

3.6.10 Network Stack Configuration

The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.

3.6.11 HDD/SSD SMART Information

The items in this menu display the SMART information of the connected devices.

NVM Express devices do not support SMART information.

3.6.9

USB Configuration

The items in this menu allow you to change the USB-related features.

The Mass Storage Devices item shows the auto-detected values. If no USB device is

detected, the item shows None.

USB Single Port Control

This item allows you to enable or disable the individual USB ports.

Refer to section 1.1.2 Motherboard layout for the location of the USB ports.

3.7

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you to change

the fan settings.

Qfan Configuration

Qfan Tuning

Click this item to automatically detect the lowest speed and configure the minimum

duty cycle for each fan.

AIO PUMP Control

[Disabled]

Disable the Water Pump control feature.

[Auto]

Detects the type of water pump installed and automatically switches

the control modes.

[DC mode]

Enable the Water Pump control in DC mode for 3-pin chassis fan.

[PWM mode]

Enable the Water Pump control in PWM mode for 4-pin chassis fan.

background image

3-16

Chapter 3: BIOS Setup

Chapter 3

3.8

Boot menu

The Boot menu items allow you to change the system boot options.

Boot Configuration

Setup Mode

[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after

POST.

[EZ Mode]

This item allows you to go to EZ Mode of the BIOS after POST.

CSM (Compatibility Support Module)

This item allows you to configure the CSM (Compatibility Support Module) items to fully

support the various VGA, bootable devices and add-on devices for better compatibility.

Launch CSM

[Auto]

The system automatically detects the bootable devices and the add-

on devices.

[Enabled]

For better compatibility, enable the CSM to fully support the non-UEFI

driver add-on devices or the Windows

®

UEFI mode.

[Disabled]

Disable the CSM to fully support the non-UEFI driver add-on devices

or the Windows

®

UEFI mode.

The following items appear only when you set the Launch CSM to [Enabled].

Boot Devices Control

This item allows you to select the type of devices that you want to boot.

Configuration options: [UEFI and Legacy OPROM] [Legacy OPROM only]

[UEFI only]

Boot from Network Devices

This item allows you to select the type of network devices that you want to

launch.

Configuration options: [Ignore] [Legacy only] [UEFI driver first]

Boot from Storage Devices

This item allows you to select the type of storage devices that you want to

launch.

Configuration options: [Ignore] [Legacy only] [UEFI driver first]

Boot from PCI-E/PCI Expansion Devices

This item allows you to select the type of PCI-E/PCI expansion devices that

you want to launch.

Configuration options: [Legacy only] [UEFI driver first]

Secure Boot

This item allows you to configure the Windows

®

Secure Boot settings and manage its keys to

protect the system from unauthorized access and malwares during POST.

background image

ROG STRIX B360-G GAMING

3-17

Chapter 3

Fast Boot

[Disabled]

Allows your system to go back to its normal boot speed.

[Enabled]

Allows your system to accelerate the boot speed.

The following items appear only when you set the Fast Boot to [Enabled].

Next Boot after AC Power Loss

[Normal Boot] Returns to normal boot on the next boot after an AC power loss.

[Fast Boot]

Accelerates the boot speed on the next boot after an AC power loss.

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system.

To access Windows

®

OS in Safe Mode, press <F8> after POST (Windows

®

8 not

supported).

To select the boot device during system startup, press <F8> when the ASUS Logo

appears.

Boot Override

These items displays the available devices. The number of device items that appears on

the screen depends on the number of devices installed in the system. Click an item to start

booting from the selected device.

3.9

Tool menu

The Tool menu items allow you to configure options for special functions. Select an item then

press <Enter> to display the submenu.

Setup Animator

This item allows you to enable or disable the Setup animator.

Configuration options: [Enabled] [Disabled]

3.9.1

ASUS EZ Flash 3 Utility

This item allows you to run ASUS EZ Flash 3. When you press <Enter>, a confirmation

message appears. Use the left/right arrow key to select between [Yes] or [No], then press

<Enter> to confirm your choice.

For more details, refer to section 3.11.2 ASUS EZ Flash 3.

background image

3-18

Chapter 3: BIOS Setup

Chapter 3

3.9.2

ASUS Secure Erase

SSD speeds may lower over time as with any storage medium due to data processing.

Secure Erase completely and safely cleans your SSD, restoring it to factory performance

levels.

Secure Erase is only available in AHCI mode. Ensure to set the SATA mode to AHCI. Click

Advanced > PCH Storage Configuration > SATA Mode Selection > AHCI.

To launch Secure Erase, click Tool > Secure Erase on the Advanced mode menu.

Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may

become unstable if you run Secure Erase on an incompatible SSD.

The time to erase the contents of your SSD may take a while depending on its size. Do not

turn off the system during the process.

Status definition:

Frozen.

The frozen state is the result of a BIOS protective measure. The BIOS

guards drives that do not have password protection by freezing them prior to booting.

If the drive is frozen, a power off or hard reset of your PC must be performed to

proceed with the Secure Erase.

Locked.

SSDs might be locked if the Secure Erase process is either incomplete

or was stopped. This may be due to a third party software that uses a different

password defined by ASUS. You have to unlock the SSD in the software before

proceeding with Secure Erase.

Displays the

available SSDs

background image

ROG STRIX B360-G GAMING

3-19

Chapter 3

3.9.4

ASUS SPD Information

This item allows you to view the DRAM SPD information.

3.9.5

Event Log

This item allows you to view the event logs in setup.

Load Profile

This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the

profile number that saved your BIOS settings, press <Enter>, and then select Yes.

DO NOT shut down or reset the system while updating the BIOS to prevent the

system boot failure!

We recommend that you update the BIOS file only coming from the same memory/

CPU configuration and BIOS version.

Profile Name

This item allows you to key in a profile name.

Save to Profile

This item allows you to save the current BIOS settings to the BIOS Flash, and create a

profile. Key in a profile number from one to eight, press <Enter>, and then select Yes.

Load/Save Profile from/to USB Drive

This item allows you to load or save profile from your USB drive, load and save profile to your

USB drive.

3.9.3

ASUS User Profile

This item allows you to store or load multiple BIOS setting profiles.

3.9.6

Graphics Card Information

This item displays the information about the graphics card installed in your system.

GPU Post

This item displays the information and recommended configuration for the PCIE slots that the

graphics card is installed in your system.

This feature is only supported on selected ASUS graphics cards.

Bus Interface

This item allows you to select the bus interface.

Configuration options: [PCIEX16_1] [PCIEX16_2]

background image

3-20

Chapter 3: BIOS Setup

Chapter 3

3.10

Exit menu

The Exit menu items allow you to load the optimal default values for the BIOS items, and

save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit

menu.

Load Optimized Defaults

This option allows you to load the default values for each of the parameters on the Setup

menus. When you select this option or if you press <F5>, a confirmation window appears.

Select OK to load the default values.

Save Changes & Reset

Once you are finished making your selections, choose this option from the Exit menu to

ensure the values you selected are saved. When you select this option or if you press <F10>,

a confirmation window appears. Select OK to save changes and exit.

Discard Changes and Exit

This option allows you to exit the Setup program without saving your changes. When you

select this option or if you press <Esc>, a confirmation window appears. Select Yes to

discard changes and exit.

Launch EFI Shell from USB drives

This item allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of

the available filesystem devices.

3.11

Updating BIOS

The ASUS website publishes the latest BIOS versions to provide enhancements on system

stability, compatibility,and performance. However, BIOS updating is potentially risky. If

there is no problem using the current version of BIOS, DO NOT manually update the BIOS.

Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the

instructions in this chapter to update your BIOS when necessary.

Visit http://www.asus.com to download the latest BIOS file for this motherboard.

The following utilities allow you to manage and update the motherboard BIOS setup program.

1.

EZ Update: Updates the BIOS in Windows

®

environment.

2.

ASUS EZ Flash 3: Updates the BIOS using a USB flash drive.

3.

ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a

USB flash drive when the BIOS file fails or gets corrupted.

3.11.1 EZ Update

The EZ Update is a utility that allows you to update the motherboard BIOS in Windows

®

environment.

EZ Update requires an Internet connection either through a network or an ISP

(Internet Service Provider).

This utility is available in the support DVD that comes with the motherboard package.

background image

ROG STRIX B360-G GAMING

3-21

Chapter 3

3.11.2 ASUS EZ Flash 3

ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet

without having to use a bootable floppy disk or an OS-based utility.

Updating through the Internet varies per region and Internet conditions. Check your local

Internet connection before updating through the Internet.

To update the BIOS by USB:

1.

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select

ASUS EZ Flash Utility

and press <Enter>.

2.

Insert the USB flash disk that contains the latest BIOS file to the USB port.

3.

Select via Storage Device(s).

4.

Press <Tab> to switch to the Drive field.

5.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,

and then press <Enter>.

6.

Press <Tab> to switch to the Folder Info field.

7.

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

background image

3-22

Chapter 3: BIOS Setup

Chapter 3

This function can support devices such as a USB flash disk with FAT 32/16 format and

single partition only.

DO NOT shut down or reset the system while updating the BIOS to prevent system

boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select

the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for

details.

To update the BIOS by Internet:

1.

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select

ASUS EZ Flash Utility

and press <Enter>.

2.

Select via Internet.

3.

Press the Left/Right arrow keys to select an Internet connection method, and then

press <Enter>.

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select

the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for

details.

4.

Follow the onscreen instructions to complete the update.

5.

Reboot the system when the update process is done.

background image

ROG STRIX B360-G GAMING

3-23

Chapter 3

3.11.3 ASUS CrashFree BIOS 3

The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the

BIOS file when it fails or gets corrupted during the updating process. You can restore a

corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains

the BIOS file.

The BIOS file in the motherboard support DVD may be older than the BIOS file published

on the ASUS official website. If you want to use the newer BIOS file, download the file at

https://www.asus.com/support/ and save it to a USB flash drive.

Recovering the BIOS

To recover the BIOS:

1.

Turn on the system.

2.

Insert the motherboard support DVD to the optical drive, or the USB flash drive

containing the BIOS file to the USB port.

3.

The utility automatically checks the devices for the BIOS file. When found, the utility

reads the BIOS file and enters ASUS EZ Flash 3 automatically.

4.

The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure

system compatibility and stability, we recommend that you press <F5> to load default

BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!

background image

3-24

Chapter 3: BIOS Setup

Chapter 3

background image

ROG STRIX B360-G GAMING

A-1

Ap

pendix

Appendix

Appendix

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

• This device may not cause harmful interference.

• This device must accept any interference received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with manufacturer’s instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required

to assure compliance with FCC regulations. Changes or modifications to this unit not

expressly approved by the party responsible for compliance could void the user’s authority

to operate this equipment.

background image

A-2

Appendix

Ap

pendix

VCCI: Japan Compliance Statement

Class B ITE

KC: Korea Warning Statement

Compliance Statement of Innovation, Science and Economic

Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

D

éclaration de conformité de Innovation, Sciences et

D

éveloppement économique Canada (ISED)

Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,

et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

CAN ICES-3(B)/NMB-3(B)

background image

ROG STRIX B360-G GAMING

A-3

Ap

pendix

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of

Chemicals) regulatory framework, we published the chemical substances in our products at

ASUS REACH website at http://csr.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to

enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin

indicates that the product (electrical and electronic equipment) should not be placed in

municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol

of the crossed out wheeled bin indicates that the battery should not be placed in municipal

waste.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards

for protecting our environment. We believe in providing solutions for you to be able to

responsibly recycle our products, batteries, other components as well as the packaging

materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling

information in different regions.

Regional notice for California

WARNING

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Google™ License Terms

Copyright© 2018 Google Inc. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file

except in compliance with the License. You may obtain a copy of the License at:

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the

License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF

ANY KIND, either express or implied.

See the License for the specific language governing permissions and limitations under the

License.

background image

A-4

Appendix

Ap

pendix

Română ASUSTeK Computer Inc. declară că acest dispozitiv se conformează

cerinţelor esenţiale şi altor prevederi relevante ale directivelor conexe. Textul

complet al declaraţiei de conformitate a Uniunii Europene se găseşte la:

www.asus.com/support

Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti

sa osnovnim zahtevima i drugim relevantnim odredbama povezanih

Direktiva. Pun tekst EU deklaracije o usaglašenosti je dostupan da adresi:

www.asus.com/support

Slovensky Spoločnosť ASUSTeK Computer Inc. týmto vyhlasuje, že toto

zariadenie vyhovuje základným požiadavkám a ostatým príslušným

ustanoveniam príslušných smerníc. Celý text vyhlásenia o zhode pre štáty EÚ

je dostupný na adrese: www.asus.com/support

Slovenščina ASUSTeK Computer Inc. izjavlja, da je ta naprava skladna z

bistvenimi zahtevami in drugimi ustreznimi določbami povezanih direktiv.

Celotno besedilo EU-izjave o skladnosti je na voljo na spletnem mestu:

www.asus.com/support

Español Por la presente, ASUSTeK Computer Inc. declara que este dispositivo

cumple los requisitos básicos y otras disposiciones pertinentes de las

directivas relacionadas. El texto completo de la declaración de la UE de

conformidad está disponible en: www.asus.com/support

Svenska ASUSTeK Computer Inc. förklarar härmed att denna

enhet överensstämmer med de grundläggande kraven och andra

relevanta föreskrifter i relaterade direktiv. Fulltext av EU-försäkran om

överensstämmelse finns på: www.asus.com/support

Українська ASUSTeK Computer Inc. заявляє, що цей пристрій відповідає

основним вимогам та іншим відповідним положенням відповідних

Директив. Повний текст декларації відповідності стандартам ЄС

доступний на: www.asus.com/support

Türkçe AsusTek Computer Inc., bu aygıtın temel gereksinimlerle ve ilişkili

Yönergelerin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder. AB

uygunluk bildiriminin tam metni şu adreste bulunabilir:

www.asus.com/support

Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen

sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva.

Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support

English ASUSTeK Computer Inc. hereby declares that this device is in

compliance with the essential requirements and other relevant provisions of

related Directives. Full text of EU declaration of conformity is available at:

www.asus.com/support

Français AsusTek Computer Inc. déclare par la présente que cet appareil est

conforme aux critères essentiels et autres clauses pertinentes des directives

concernées. La déclaration de conformité de l’UE peut être téléchargée à

partir du site Internet suivant : www.asus.com/support

Deutsch ASUSTeK Computer Inc. erklärt hiermit, dass dieses Gerät mit

den wesentlichen Anforderungen und anderen relevanten Bestimmungen

der zugehörigen Richtlinien übereinstimmt. Der gesamte Text der EU-

Konformitätserklärung ist verfügbar unter: www.asus.com/support

Italiano ASUSTeK Computer Inc. con la presente dichiara che questo

dispositivo è conforme ai requisiti essenziali e alle altre disposizioni pertinenti

con le direttive correlate. Il testo completo della dichiarazione di conformità

UE è disponibile all’indirizzo: www.asus.com/support

Русский Компания ASUS заявляет, что это устройство соответствует

основным требованиям и другим соответствующим условиям

соответствующих директив. Подробную информацию, пожалуйста,

смотрите на www.asus.com/support

Български С настоящото ASUSTeK Computer Inc. декларира, че това

устройство е в съответствие със съществените изисквания и другите

приложими постановления на свързаните директиви. Пълният текст на

декларацията за съответствие на ЕС е достъпна на адрес:

www.asus.com/support

Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan

s bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva.

Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support

Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že toto

zařízení splňuje základní požadavky a další příslušná ustanovení souvisejících

směrnic. Plné znění prohlášení o shodě EU je k dispozici na adrese:

www.asus.com/support

Dansk ASUSTeK Computer Inc. erklærer hermed, at denne enhed er i

overensstemmelse med hovedkravene og andre relevante bestemmelser i de

relaterede direktiver. Hele EU-overensstemmelseserklæringen kan findes på:

www.asus.com/support

Nederlands ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat

voldoet aan de essentiële vereisten en andere relevante bepalingen van

de verwante richtlijnen. De volledige tekst van de EU-verklaring van

conformiteit is beschikbaar op: www.asus.com/support

Eesti Käesolevaga kinnitab ASUSTeK Computer Inc, et see seade vastab

asjakohaste direktiivide oluliste nõuetele ja teistele asjassepuutuvatele

sätetele. EL vastavusdeklaratsiooni täielik tekst on saadaval järgmisel

aadressil: www.asus.com/support

Suomi ASUSTeK Computer Inc. ilmoittaa täten, että tämä laite on

asiaankuuluvien direktiivien olennaisten vaatimusten ja muiden tätä

koskevien säädösten mukainen. EU-yhdenmukaisuusilmoituksen koko teksti

on luettavissa osoitteessa: www.asus.com/support

Ελληνικά Με το παρόν, η AsusTek Computer Inc. δηλώνει ότι αυτή η

συσκευή συμμορφώνεται με τις θεμελιώδεις απαιτήσεις και άλλες σχετικές

διατάξεις των Οδηγιών της ΕΕ. Το πλήρες κείμενο της δήλωσης συμβατότητας

είναι διαθέσιμο στη διεύθυνση: www.asus.com/support

Magyar Az ASUSTeK Computer Inc. ezennel kijelenti, hogy ez az eszköz

megfelel a kapcsolódó Irányelvek lényeges követelményeinek és egyéb

vonatkozó rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövege

innen letölthető: www.asus.com/support

Latviski ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst saistīto

Direktīvu būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem.

Pilns ES atbilstības paziņojuma teksts pieejams šeit: www.asus.com/support

Lietuvių „ASUSTeK Computer Inc.“ šiuo tvirtina, kad šis įrenginys atitinka

pagrindinius reikalavimus ir kitas svarbias susijusių direktyvų nuostatas. Visą

ES atitikties deklaracijos tekstą galima rasti: www.asus.com/support

Norsk ASUSTeK Computer Inc. erklærer herved at denne enheten er i

samsvar med hovedsaklige krav og andre relevante forskrifter i relaterte

direktiver. Fullstendig tekst for EU-samsvarserklæringen finnes på:

www.asus.com/support

Polski Firma ASUSTeK Computer Inc. niniejszym oświadcza, że

urządzenie to jest zgodne z zasadniczymi wymogami i innymi właściwymi

postanowieniami powiązanych dyrektyw. Pełny tekst deklaracji zgodności UE

jest dostępny pod adresem: www.asus.com/support

Português A ASUSTeK Computer Inc. declara que este dispositivo está em

conformidade com os requisitos essenciais e outras disposições relevantes

das Diretivas relacionadas. Texto integral da declaração da UE disponível em:

www.asus.com/support

background image

ROG STRIX B360-G GAMING

A-5

Ap

pendix

ASUS contact information

ASUSTeK COMPUTER INC.

Address

4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan

Telephone

+886-2-2894-3447

Fax

+886-2-2890-7798

Web site

www.asus.com

Technical Support

Telephone

+86-21-38429911

Fax

+86-21-5866-8722, ext. 9101#

Online support

https://www.asus.com/support/Product/ContactUs/

Services/questionform/?lang=en

ASUS COMPUTER INTERNATIONAL (America)

Address

800 Corporate Way, Fremont, CA 94539, USA

Telephone

+1-510-739-3777

Fax

+1-510-608-4555

Web site

http://www.asus.com/us/

Technical Support

Support fax

+1-812-284-0883

Telephone

+1-812-282-2787

Online support

https://www.asus.com/support/Product/ContactUs/

Services/questionform/?lang=en-us

ASUS COMPUTER GmbH (Germany and Austria)

Address

Harkort Str. 21-23, 40880 Ratingen, Germany

Fax

+49-2102-959931

Web site

http://www.asus.com/de

Online contact

http://eu-rma.asus.com/sales

Technical Support

Telephone

+49-2102-5789555

Support Fax

+49-2102-959911

Online support

https://www.asus.com/support/Product/ContactUs/

Services/questionform/?lang=de-de

background image

A-6

Appendix

Ap

pendix

DECLARATION OF CONFORMITY

Compliance Information Statement

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name:

Asus Computer International

Address: 800 Corporate Way, Fremont

, CA 94539.

Phone/Fax No: (510)739-3777/(510)608-4555

hereby declares that the product

Product Name : Motherboard

Model Number : ROG STRIX B360-G GAMING

Conforms to the following specifications:

FCC Part 15, Subpart B, Unintentional Radiators

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.


Document Outline


PDF in reiner Textform anzeigen:


Motherboard
ROG STRIX
B360-G
GAMING
E13783
First Edition
February 2018


Copyright© 2018 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from https://www.asus.com/support/
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).




ii
Contents
Safety information........................................................................................................ v
About this guide.......................................................................................................... vi
ROG STRIX B360-G GAMING specifications summary......................................... viii
Package contents........................................................................................................ xi
Installation tools and components........................................................................... xii

Chapter 1: Product Introduction
1.1 Motherboard overview................................................................................ 1-1
1.1.1 Before you proceed...................................................................... 1-1
1.1.2 Motherboard layout...................................................................... 1-2
1.1.3 Central Processing Unit (CPU).................................................... 1-4
1.1.4 System memory........................................................................... 1-5
1.1.5 Expansion slots............................................................................ 1-7
1.1.6 Jumper......................................................................................... 1-9
1.1.7 Internal connectors.................................................................... 1-10

Chapter 2: Basic Installation
2.1 Building your PC system............................................................................ 2-1
2.1.1 CPU installation........................................................................... 2-1
2.1.2 Cooling system installation.......................................................... 2-3
2.1.3 Motherboard installation............................................................... 2-5
2.1.4 DIMM installation......................................................................... 2-6
2.1.5 ATX power connection................................................................. 2-7
2.1.6 SATA device connection.............................................................. 2-8
2.1.7 Front I/O connector...................................................................... 2-9
2.1.8 Expansion card installation........................................................ 2-10
2.1.9 M.2 installation........................................................................... 2-11
2.2 Motherboard rear and audio connections.............................................. 2-12
2.2.1 Rear I/O connection................................................................... 2-12
2.2.2 Audio I/O connections................................................................ 2-14
2.3 Starting up for the first time..................................................................... 2-16
2.4 Turning off the computer......................................................................... 2-16




iii
Chapter 3: BIOS Setup
3.1 Knowing BIOS............................................................................................. 3-1
3.2 BIOS setup program................................................................................... 3-2
3.2.1 Advanced Mode........................................................................... 3-3
3.2.2 EZ Mode...................................................................................... 3-6
3.2.3 QFan Control............................................................................... 3-7
3.3 My Favorites................................................................................................ 3-9
3.4 Main menu................................................................................................. 3-11
3.5 Ai Tweaker menu....................................................................................... 3-11
3.6 Advanced menu........................................................................................ 3-12
3.6.1 Platform Misc Configuration....................................................... 3-12
3.6.2 CPU Configuration..................................................................... 3-12
3.6.3 System Agent (SA) Configuration.............................................. 3-13
3.6.4 PCH Configuration..................................................................... 3-13
3.6.5 PCH Storage Configuration....................................................... 3-13
3.6.6 PCH-FW Configuration.............................................................. 3-14
3.6.7 Onboard Devices Configuration................................................. 3-14
3.6.8 APM Configuration..................................................................... 3-14
3.6.9 USB Configuration..................................................................... 3-15
3.6.10 Network Stack Configuration..................................................... 3-15
3.6.11 HDD/SSD SMART Information.................................................. 3-15
3.7 Monitor menu............................................................................................ 3-15
3.8 Boot menu................................................................................................. 3-16
3.9 Tool menu.................................................................................................. 3-17
3.9.1 ASUS EZ Flash 3 Utility............................................................. 3-17
3.9.2 ASUS Secure Erase.................................................................. 3-18
3.9.3 ASUS User Profile..................................................................... 3-19
3.9.4 ASUS SPD Information.............................................................. 3-19
3.9.5 Event Log................................................................................... 3-19
3.9.6 Graphics Card Information......................................................... 3-19
3.10 Exit menu................................................................................................... 3-20
3.11 Updating BIOS........................................................................................... 3-20
3.11.1 EZ Update.................................................................................. 3-20
3.11.2 ASUS EZ Flash 3....................................................................... 3-21
3.11.3 ASUS CrashFree BIOS 3........................................................... 3-23

Appendix
Notices A-1
ASUS contact information....................................................................................... A-5




iv
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.



Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
• Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified service
technician or your retailer.




v
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.

How this guide is organized
This guide contains the following parts:
1. Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes description of the switches, jumpers, and connectors on the
motherboard.
2. Chapter 2: Basic Installation
This chapter lists the hardware setup procedures that you have to perform when
installing system components.
3. Chapter 3: BIOS Setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.

Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware
and software products.
2. Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.




vi
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.

CAUTION: Information to prevent damage to the components when trying to
complete a task.


IMPORTANT: Instructions that you MUST follow to complete a task.


NOTE: Tips and additional information to help you complete a task.



Typography
Bold text Indicates a menu or an item to select.
Italics Used to emphasize a word or a phrase.
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: means that you must press the Enter or
Return key.
+ + If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).




vii
ROG STRIX B360-G GAMING specifications summary
Intel® Socket 1151 for 8th generation Core Processors
CPU Supports Intel® Turbo Boost Technology 2.0*

* Intel® Turbo Boost Technology 2.0 support depends on the CPU types

Chipset Intel® B360 Chipset
4 x  IMM, max. 64GB DDR4 2666 / 2400 / 2133 MHz Non-ECC, Un-
D
buffered Memory*
Dual channel memory architecture
Memory Supports Intel® Extreme Memory Profile (XMP)

* Due to Intel® chipset limitation, DDR4 2666MHz memory frequency is only
supported by 8th Generation Intel® 6-core processors. Higher memory modules
will run at the maximum transfer rate of DDR4 2666MHz.

Integrated Graphics Processor- Intel® HD Graphics support
Multi-VGA output support : HDMI/DVI ports
Graphics - Supports DisplayPort 1.2 with max. resolution 4096 x 2304 @ 60Hz
- Supports HDMI 1.4b with max. resolution 4096 x 2160 @ 30Hz
Maximum shared memory of 1024MB
Multi-GPU Supports AMD® 2-Way CrossFireX™ Technology
Support
1x PCIe 3.0 x16 Safeslot
Expansion slots 1 x PCIe 3.0 x 16 slot (max. at x4 mode)
2 x PCIe 3.0 x1 slots
Intel® B360 Chipset
- 6 x SATA 6Gb/s ports
Intel® B360 Chipset
- 1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices

support (SATA & PCIE 3.0 x 2 mode)
Storage
- 1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices

support (PCIE 3.0 x 4 mode)*
- Ready for Intel® Optane Memory*

* Before using Intel® Optane memory modules, ensure that you have updated your
motherboard drivers and BIOS to the latest version from ASUS support website.

1 x ntel® I219-V Gigabit LAN- Dual interconnect between the integrated
I
LAN Media Access Controller (MAC) and physical layer (PHY)
Anti-surge LANGuard
(continued on the next page)




viii
ROG STRIX B360-G GAMING specifications summary
ROG SupremeFX S1220A Codec
- Dual OP Amplifiers
- Impedance sense for front and rear headphone outputs
- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
-  igh quality 120 dB SNR stereo playback output and 113 dB SNR
H
recording input
- SupremeFX Shielding Technology
Audio Audio Feature:
-  ED-lit Audio Shielding: Ensures precision analog/digital separation and
L
greatly reduced multi-lateral interference, with a gorgeous illuminated trace
path
-  remium Japan-made audio capacitors provides warm, natural, and
P
immersive sound with exceptional clarity and fidelity
- Optical S/PDIF out port(s) at back panel
- Sonic Radar III
- Sonic Studio III
Intel® B360 Chipset
- 2 x USB 3.1 Gen 2 ports ( 2 ports at back panel [red])
USB
- 4 x USB 3.1 Gen 1 ports (2 ports at mid-board [black])
- 6 x USB 2.0 ports( 4 ports at mid-board)
Gamer’s Guardian:
- ESD Guards on LAN, Audio, KBMS and USB3.1 Gen 1/2.0 ports
- DRAM Overcurrent Protection
- Stainless Steel Back I/O
- Highly Durable Components
- DIGI+ VRM
- SafeSlot
GPU Boost
ASUS Exclusive Features:
- AI Suite 3
ASUS Special
- ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface
Features
- ASUS Aura lighting control
ASUS EZ DIY:
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 3
- ASUS MyLogo
ASUS Q-Design:
- ASUS Q-Slot
- ASUS Q-DIMM
Pre-mounted I/O Shield
Fan Xpert 4 CORE
(continued on the next page)




ix
ROG STRIX B360-G GAMING specifications summary
1 x PS/2 keyboard/mouse combo port
2 x USB 2.0 ports
1 x DVI port
1 x HDMI 1.4b port
Back I/O Ports 2 x USB 3.1 Gen 2 ports (2 x Type-A [Red])
1 x LAN (RJ45) port
2 x USB 3.1 Gen 1 ports
1 x Optical S/PDIF out
5 x Gold-plated audio jacks
1 x AAFP connector
1 x 4-pin RGB Header
1 x USB 3.1 Gen 1 connector supports additional 2 x USB 3.1 Gen 1 ports
2 x USB 2.0 connectors supports additional 4 x USB 2.0 ports
1 x  .2 Socket 3 with M key, type 2242/2260/2280 storage devices support
M
(SATA & PCIE 3.0 x 2 mode)
1 x  .2 Socket 3 with M key, type 2242/2260/2280storage devices support
M
(PCIE 3.0 x 4 mode)
1 x TPM connector
Internal I/O
Ports 1 x COM port connector
6 x SATA 6Gb/s connectors
1 x AIO_Pump connector
1 x CPU Fan connector
1 x Chassis Fan connector
1 x 8-pin EATX 12 V Power connector
1 x 24-pin EATX Power connector
1 x Clear CMOS jumper
1 x System panel connector
1 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.0, ACPI
6.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F6 Qfan
BIOS Control, F3 My Favorites, Last Modified log, F12 PrintScreen and ASUS
DRAM SPD (Serial Presence Detect) memory information, ASUS Secure
Erase, ASUS User Profile, F4 AURA ON/OFF, F9 Search
Manageability WOL, WOR, PXE
Drivers
EZ Update
Software
Anti-virus software (OEM version)
ASUS Utilities
Operating Windows® 10 64-bit
system support
Form factor Micro ATX Form Factor 9.6 inch x 9.6 inch ( 24.4 cm x 24.4 cm )


Specifications are subject to change without notice. Please refer to the ASUS website for
the latest specifications.




x
Package contents
Check your motherboard package for the following items.

Motherboard 1 x ROG STRIX B360-G GAMING motherboard
Cables 1 x 2-in-1 SATA 6Gb/s cables
1 x Cable Tie black
1 x ROG Strix Series sticker
Accessories
1 x ROG Strix Series Door Hanger
1 x M.2 Screws Package
Application drive 1 x ROG motherboard support DVD
Documentation 1 x User guide



If any of the above items is damaged or missing, contact your retailer.




xi
Installation tools and components




Intel® 1151 CPU

Intel® 1151 compatible CPU Fan




Phillips (cross) screwdriver
PC chassis SATA hard disk drive




1 bag of screws DIMM

Power supply unit




SATA optical disc drive (optional)
Graphics card




The tools and components listed above are not included in the motherboard package.




xii
1
Chapter 1: Product Introduction




Product Introduction




Chapter 1
1.1 Motherboard overview
1.1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.




ROG STRIX B360-G GAMING 1-1
1.1.2 Motherboard layout
Chapter 1




Refer to 1.1.7 Internal connectors and 2.2.1 Rear I/O connection for more information
about rear panel connectors and internal connectors.




1-2 Chapter 1: Product Introduction
Layout contents

Connectors/Jumpers/Slots Page
1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) 1-16




Chapter 1
2. LGA1151 CPU socket 1-4
3. Fan and pump connectors (4-pin CPU_FAN; 4-pin AIO_PUMP; 4-pin
1-15
CHA_FAN1-2)
4. DDR4 DIMM slots 1-5
5. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6) 1-10
6. USB 3.1 Gen 1 connector (20-1 pin U31G1_56) 1-13
7. M.2 sockets (M.2_1; M.2_2) 1-12
8. System panel connector (20-3 pin PANEL) 1-17
9. Clear RTC RAM jumper (2-pin CLRTC) 1-9
10. USB 2.0 connectors (10-1 pin USB78, USB1114) 1-13
11. TPM connector (14-1 pin TPM) 1-12
12. Serial port connector (10-1 pin COM) 1-11
13. AURA RGB header (4-pin RGB_HEADER) 1-14
14. Front panel audio connector (10-1 pin AAFP) 1-11




ROG STRIX B360-G GAMING 1-3
1.1.3 Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1151 socket designed for the 8th
Generation Intel® Core™ processor.
Chapter 1




Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install
a CPU designed for LGA1150, LGA1155 and LGA1156 sockets in the LGA1151 socket.



• Ensure that all power cables are unplugged before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.

• Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1151 socket.

• The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.




1-4 Chapter 1: Product Introduction
1.1.4 System memory
The motherboard comes with four DDR4 (Double Data Rate 4) Quad Inline Memory Modules
(DIMM) slots.




Chapter 1
A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT
install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.




Recommended memory configurations




The recommended memory DIMM slots are marked with an asterix (*).




ROG STRIX B360-G GAMING 1-5
Memory configurations
You may install 1 GB, 2 GB, 4 GB, 8 GB and 16 GB unbuffered and non‑ECC DDR4 DIMMs
into the DIMM sockets.
Chapter 1




You may install varying memory sizes in Channel A and Channel B. The system maps the
total size of the lower-sized channel for the dual-channel configuration. Any excess memory
from the higher-sized channel is then mapped for single-channel operation.



• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.

• For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.

• Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.




1-6 Chapter 1: Product Introduction
1.1.5 Expansion slots
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.




Slot No. Slot Description Chapter 1
1 PCIEX16_1 slot
2 PCIEX1_1 slot
3 PCIEX1_2 slot
4 PCIEX16_2 slot




ROG STRIX B360-G GAMING 1-7
PCI Express 3.0 operating mode
VGA configuration
PCIEX16_1 PCIEX16_2
Chapter 1




x16 (single VGA
Single VGA/PCIe card x4
recommended)



• We recommend that you provide sufficient power when running CrossFireX™ mode.

• Connect a chassis fan to the motherboard connector labeled CHA_FAN1-2 when
using multiple graphics cards for better thermal environment.


IRQ assignments for this motherboard

A B C D E F G H
PCIEX16_1 shared - - - - - - -
PCIEX1_1 - - shared - - - - -
PCIEX1_2 - - shared - - - - -
PCIEX16_2 shared - - - - - - -
M.2_1 shared - - - - - - -
M.2_2 shared - - - - - - -
Intel LAN I219V - - - shared - - - -
XHCI Controller - - - shared - - - -
IGFX shared - - - - - - -
LpcBridge shared - - - - - - -
SATA Controller shared - - - - - - -
High Definition Audio shared - - - - - - -
SMBus shared - - - - - - -
Gbe Controller shared - - - - - - -
CNVi WiFir Controller shared - - - - - - -
ME shared - - - - - - -




1-8 Chapter 1: Product Introduction
1.1.6 Jumper
1. Clear RTC RAM jumper (2-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing the




Chapter 1
CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.




To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.
3. Plug the power cord and turn ON the computer.
4. Hold down the key during the boot process and enter BIOS setup to re-enter
data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!



• If the steps above do not help, remove the onboard battery and move the jumper
again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the
battery.

• You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.

• Due to the chipset behavior, AC power off is required to enable C.P.R. function. You
must turn off and on the power supply or unplug and plug the power cord before
rebooting the system.




ROG STRIX B360-G GAMING 1-9
1.1.7 Internal connectors
1. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
Chapter 1




1-10 Chapter 1: Product Introduction
2. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
HD Audio standard. Connect one end of the front panel audio I/O module cable to this
connector.




Chapter 1
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.




3. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.




The COM module is purchased separately.




ROG STRIX B360-G GAMING 1-11
4. TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which securely
stores keys, digital certificates, passwords and data. A TPM system also helps
enhance network security, protect digital identities, and ensures platform integrity.
Chapter 1




The TPM module is purchased separately.




5. M.2 socket (M.2_1; M.2_2)
These sockets allow you to install M.2 SSD modules.




• M.2_1 socket supports PCIe 3.0 x2 and SATA mode M Key design and type 2242 /
2260 / 2280 PCIe and SATA storage devices.

• M.2_2 socket supports PCIe 3.0 x4 M Key design and type 2242 / 2260 / 2280 PCIe
storage devices.

• M.2_2 socket supports IRST (Intel® Rapid Storage Technology) and Intel® Optane
Memory.



The M.2 SSD module is purchased separately.




1-12 Chapter 1: Product Introduction
6. USB 2.0 connector (10-1 pin USB910, USB1114)
This connector is for USB 2.0 ports. Connect the USB module cable to these
connectors, then install the module to a slot opening at the back of the system chassis.
This USB connector complies with USB 2.0 specification that supports up to 480 Mb/s
connection speed.




Chapter 1
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!



The USB 2.0 module is purchased separately.




7. USB 3.1 Gen 1 connectors (20-1 pin U31G1_56)
These connectors allow you to connect a USB 3.1 Gen 1 module for additional USB
3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can
enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to
5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency,
and backward compatibility with USB 2.0.




The USB 3.1 Gen 1 module is purchased separately.




ROG STRIX B360-G GAMING 1-13
8. AURA RGB headers (4-pin RGB_HEADER)
This connector is for RGB LED strips.
Chapter 1




The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum
power rating of 3A (12V), and no longer than 3 m.



Before you install or remove any component, ensure that the ATX power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.



• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the RGB LED extension cable and the
RGB LED strip is connected in the correct orientation, and the 12V connector is
aligned with the 12V header on the motherboard.

• The LED strip will only light up when the system is operating.

• The LED strip is purchased separately.




1-14 Chapter 1: Product Introduction
9. Fan and pump connectors (4-pin CPU_FAN; 4-pin AIO_PUMP; 4-pin CHA_FAN1-2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.




Chapter 1
• DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!

• Ensure that the CPU fan cable is securely installed to the CPU fan connector.



Connect the pump cable from the all-in-one cooler (AIO cooler) to the AIO_PUMP header,
and connect the fan cables to the CPU_FAN and CHA_fan1 headers.




ROG STRIX B360-G GAMING 1-15
10. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
Chapter 1




• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.

• DO NOT forget to connect the 8-pin EATX12V power plug. Otherwise, the system will
not boot.

• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.

• If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.




1-16 Chapter 1: Product Introduction
11. System panel connector (20-3 pin PANEL)
This connector supports several chassis-mounted functions.




Chapter 1
• System power LED (2-pin or 3-1 pin PLED)
The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when you turn on
the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
• System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
• ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the operating
system settings. Pressing the power switch for more than four seconds while the
system is ON turns the system OFF.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.




ROG STRIX B360-G GAMING 1-17
Chapter 1




1-18 Chapter 1: Product Introduction
2
Chapter 2: Basic Installation




Basic Installation
2.1 Building your PC system
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps are the same for all models.


2.1.1 CPU installation

Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install
a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket.




Chapter 2




ROG STRIX B360-G GAMING 2-1
Chapter 2




2-2 Chapter 2: Basic Installation
2.1.2 Cooling system installation



Apply the Thermal Interface Material to the
CPU cooling system and CPU before you
install the cooling system, if necessary.




To install the CPU heatsink and fan assembly




Chapter 2




ROG STRIX B360-G GAMING 2-3
To install an AIO cooler
Chapter 2




AIO_PUMP




CPU_FAN


CHA_FAN1




2-4 Chapter 2: Basic Installation
2.1.3 Motherboard installation
1. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.




Chapter 2
2. Place eight (8) screws into the holes indicated by circles to secure the motherboard to
the chassis.




DO NOT overtighten the screws! Doing so can damage the motherboard.




ROG STRIX B360-G GAMING 2-5
2.1.4 DIMM installation
Chapter 2




To remove a DIMM




2-6 Chapter 2: Basic Installation
2.1.5 ATX power connection




Chapter 2
Ensure to connect the 8-pin power plug.




ROG STRIX B360-G GAMING 2-7
2.1.6 SATA device connection




OR
Chapter 2




OR




2-8 Chapter 2: Basic Installation
2.1.7 Front I/O connector

To install front panel connector To install front panel audio connector




AAFP




Chapter 2
To install USB 3.1 Gen 1 connector To install USB 2.0 connector




USB 3.1 Gen 1




USB 2.0




ROG STRIX B360-G GAMING 2-9
2.1.8 Expansion card installation
To install PCIe x16 cards
Chapter 2




To install PCIe x1 cards




2-10 Chapter 2: Basic Installation
2.1.9 M.2 installation




Chapter 2




ROG STRIX B360-G GAMING 2-11
2.2 Motherboard rear and audio connections
2.2.1 Rear I/O connection
Chapter 2




Rear panel connectors
1. PS/2 keyboard/mouse combo port 6. HDMI port
2. DVI-D port 7. USB 3.1 Gen 1 port 34
3. USB 3.1 Gen 2 Type-A port 12 8. Optical S/PDIF Out port
4. LAN (RJ-45) port* 9. Audio I/O ports**
5. USB 2.0 ports 910

* and ** :  efer to the tables on the next page for LAN port LEDs and audio port definitions.
R



• USB 3.1 Gen 1/Gen 2 devices can only be used as data storage only.

• We strongly recommend that you connect your devices to ports with matching data
transfer rate. Please connect your USB 3.1 Gen 2 devices to USB 3.1 Gen 2 ports for
faster and better performance for your devices.




2-12 Chapter 2: Basic Installation
* LAN ports LED indications
Activity Link LED Speed LED
Status Description Status Description
ACT/LINK SPEED
Off No link Off 10 Mbps connection LED LED
Orange Linked Orange 100 Mbps connection
Orange (Blinking) Data activity Green 1 Gbps connection
Orange (Blinking Ready to wake up LAN port
then steady) from S5 mode



** Audio 2, 4, 5.1, or 7.1-channel configuration
Headset
Port 4-channel 5.1-channel 7.1-channel
2-channel




Chapter 2
Light Blue Line In Line In Line In Side speaker
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In Mic In
Orange – – Center/Subwoofer Center/Subwoofer
Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out




ROG STRIX B360-G GAMING 2-13
2.2.2 Audio I/O connections
Audio I/O ports




Connect to Headphone and Mic
Chapter 2




Connect to Stereo Speakers




Connect to 2-channel Speakers




2-14 Chapter 2: Basic Installation
Connect to 4-channel Speakers




Connect to 5.1-channel Speakers




Connect to 7.1-channel Speakers Chapter 2




ROG STRIX B360-G GAMING 2-15
2.3 Starting up for the first time
1. After making all the connections, replace the system case cover.
2. Ensure that all switches are off.
3. Connect the power cord to the power connector at the back of the system chassis.
4. Connect the power cord to a power outlet that is equipped with a surge protector.
5. Turn on the devices in the following order:
a. Monitor
b. External storage devices (starting with the last device on the chain)
c. System power
6. After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
Chapter 2




“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests (POST). While the tests are running, the
BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.

BIOS Beep Description
One short beep VGA detected
Quick boot set to disabled
No keyboard detected
One continuous beep followed by two No memory detected
short beeps then a pause (repeated)
One continuous beep followed by three No VGA detected
short beeps
One continuous beep followed by four Hardware component failure
short beeps

7. At power on, hold down the key to enter the BIOS Setup. Follow the
instructions in Chapter 3.



2.4 Turning off the computer
While the system is ON, press the power button for less than four seconds to put the system
on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch
for more than four seconds to let the system enter the soft-off mode regardless of the BIOS
setting.




2-16 Chapter 2: Basic Installation
Chapter 3: BIOS Setup




BIOS Setup

3.1 Knowing BIOS
3
The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI
architecture, offering a user-friendly interface that goes beyond the traditional keyboard-
only BIOS controls to enable a more flexible and convenient mouse input. You can easily
navigate the new UEFI BIOS with the same smoothness as your operating system. The
term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.

BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
• An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
• You have installed a new system component that requires further BIOS settings or
update.

Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.




Chapter 3
When downloading or updating the BIOS file, rename it as SB360GG.CAP for this
motherboard.




ROG STRIX B360-G GAMING 3-1
3.2 BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.

Entering BIOS at startup
To enter BIOS Setup at startup, press or during the Power-On Self Test
(POST). If you do not press or , POST continues with its routines.

Entering BIOS Setup after POST
To enter BIOS Setup after POST:
• Press ++ simultaneously.
• Press the reset button on the system chassis.
• Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
After doing either of the three options, press key to enter BIOS.


• The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.

• Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.

• If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey . See section 3.10 Exit Menu
for details.

• If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
Chapter 3




reset the motherboard to the default value. See section 1.1.6 Jumpers and holes for
information on how to erase the RTC RAM via the Clear CMOS jumper.

• The BIOS setup program does not support the Bluetooth devices.



Please visit ASUS website for the detailed BIOS content manual.


BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from Setup Mode in Boot menu or by pressing the hotkey.




3-2 Chapter 3: BIOS Setup
3.2.1 Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.

The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section Boot menu for details.


Configuration fields
Pop-up Menu Scroll bar
Menu bar Language MyFavorite(F3) Qfan Control(F6) Search(F9) AURA ON/OFF(F4)




Chapter 3
Menu items General help Last modified settings Go back to EZ Mode Hot Keys
Search on the FAQ

Displays a quick overview
of the system status




ROG STRIX B360-G GAMING 3-3
Menu bar
The menu bar on top of the screen has the following main items:

My Favorites For saving the frequently-used system settings and configuration.
Main For changing the basic system configuration
Ai Tweaker For changing the overclocking settings
Advanced For changing the advanced system settings
For displaying the system temperature, power status, and changing
Monitor
the fan settings.
Boot For changing the system boot configuration
Tool For configuring options for special functions
Exit For selecting the exit options and loading default settings


Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the
menu bar have their respective menu items.

Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press .

Language
This button above the menu bar contains the languages that you can select for your BIOS.
Click this button to select the language that you want to display in your BIOS screen.
Chapter 3




My Favorites(F3)
This button above the menu bar shows all BIOS items in a Tree Map setup. Select frequently-
used BIOS settings and save it to MyFavorites menu.

Refer to section 3.3 My Favorites for more information.


Q-Fan Control(F6)
This button above the menu bar displays the current settings of your fans. Use this button to
manually tweak the fans to your desired settings.

Refer to section 3.2.3 QFan Control for more information.


Search (F9)
This button allows you to search for BIOS items by entering its name, enter the item name to
find the related item listing.




3-4 Chapter 3: BIOS Setup
AURA (F4)
This button allows you to turn the RGB LED lighting or functional LED on or off.
[ON] All AURA effects will be enabled. (Default mode)
[OFF] All AURA effects will be disabled.
[Stealth Mode] Functional LEDs (Q-Code and HDD_LED) and all AURA effects will be
disabled.

Search on FAQ
Move your mouse over this button to show a QR code, scan this QR code on your mobile
device to connect to the BIOS FAQ web page of the ASUS support website. You can also
scan the following QR code:




Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit
on the screen. Press the Up/Down arrow keys or / keys to display
the other items on the screen.

General help
At the bottom of the menu screen is a brief description of the selected item. Use key
to capture the BIOS screen and save it to the removable storage device.




Chapter 3
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not user-
configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press to display a list of options.

Hot keys
This button contains the navigation keys for the BIOS setup program. Use the navigation
keys to select items in the menu and change the settings.

Last Modified button
This button shows the items that you last modified and saved in BIOS Setup.




ROG STRIX B360-G GAMING 3-5
3.2.2 EZ Mode
The EZ Mode provides you an overview of the basic system information, and allows you to
select the display language, system performance, mode and boot device priority. To access
the Advanced Mode, select Advanced Mode or press the hotkey for the advanced
BIOS settings.

To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the hotkey.



Displays the system properties of the selected mode.
Selects the display language Click < or > to switch EZ System Tuning modes
of the BIOS setup program
Displays a quick overview
of the system status
Search(F9) AURA ON/OFF(F4)
Chapter 3




Enables or disables
Intel Rapid Storage Technology Saves the changes
and resets the system
Displays the CPU Fan’s speed. Click
the button to manually tune the fans
Click to go to Advanced mode
Loads optimized
default settings Search on the FAQ
Click to display boot devices
Selects the boot device priority



The boot device options vary depending on the devices you installed to the system.




3-6 Chapter 3: BIOS Setup
3.2.3 QFan Control
The QFan Control allows you to set a fan profile or manually configure the operating speed of
your CPU and chassis fans.


Click to select a fan to be Click to activate Click to activate DC Mode
configured PWM Mode




Select a profile to Click to apply the fan setting
apply to your fans
Click to undo the Click to go back to main menu
changes




Chapter 3
Select to manually configure
your fans




ROG STRIX B360-G GAMING 3-7
Configuring fans manually
Select Manual from the list of profiles to manually configure your fans’ operating speed.




Speed points Select to manually
configure your fans
To configure your fans:
1. Select the fan that you want to configure and to view its current status.
Chapter 3




2. Click and drag the speed points to adjust the fans’ operating speed.
3. Click Apply to save the changes then click Exit (ESC).




3-8 Chapter 3: BIOS Setup
3.3 My Favorites
My Favorites is your personal space where you can easily save and access your favorite
BIOS items.




My Favorites comes with several performance, power saving, and fast boot related items by
default. You can personalize this screen by adding or removing items.




Chapter 3




ROG STRIX B360-G GAMING 3-9
Adding items to My Favorites
To add BIOS items:

1. Press on your keyboard or click from the BIOS screen to open
Setup Tree Map screen.
2. On the Setup Tree Map screen, select the BIOS items that you want to save in My
Favorites screen.




Main menu panel
Selected shortcut
items




Submenu panel


Delete all favorite
items
Recover to default
favorite items



3. Select an item from main menu panel, then click the submenu that you want to save as
favorite from the submenu panel and click or press on your keyboard.

You cannot add the following items to My Favorite items:

• Items with submenu options
Chapter 3




• User-managed items such as language and boot order

• Configuration items such as Memory SPD Information, system time and date.


4. Click Exit (ESC) or press key to close Setup Tree Map screen.
5. Go to My Favorites menu to view the saved BIOS items.




3-10 Chapter 3: BIOS Setup
3.4 Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Security
The Security menu items allow you to change the system security settings.


• If you have forgotten your BIOS password, erase the CMOS Real Time Clock
(RTC) RAM to clear the BIOS password. See section 1.1.6 Jumper and holes for
information on how to erase the RTC RAM via the Clear RTC RAM jumper.

• The Administrator or User Password items on top of the screen show the default [Not
Installed]. After you set a password, these items show [Installed].



3.5 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.

Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction



The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.


Ai Overclock Tuner
Allows you to select the CPU overclocking options to achieve the desired CPU internal




Chapter 3
frequency.
[Auto] Loads the optimal settings for the system.
[X.M.P.] If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.

The [X.M.P.] configuration option appears only when you install memory modules
supporting the eXtreme Memory Profile(X.M.P.) Technology.


CPU Core Ratio
This item allows you to set the CPU core ratios.
Configuration options: [Auto] [Sync All Cores] [Per Core]

DRAM Frequency
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [Auto] [DDR4-800MHz] - [DDR4-8533MHz]




ROG STRIX B360-G GAMING 3-11
Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.
Intel(R) SpeedStep(tm)
Allows the operating system to dynamically adjust the processor voltage and cores
frequency to decrease the average power consumption and decrease average heat
production.
Configuration options: [Auto] [Enabled] [Disabled]
Turbo Mode
Allows you to enable your processor cores to run faster than the base operating
frequency when it is below power, current and specification limit.
Configuration options: [Disabled] [Enabled]


3.6 Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.

Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.



3.6.1 Platform Misc Configuration
The items in this menu allow you to change the ASPM for PCH and SA PCI Express.

3.6.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
Chapter 3




detects.

The items in this menu may vary based on the CPU installed.


CPU - Power Management Control
This item allows you to manage and configure the CPU’s power.
Intel(R) SpeedStep(tm)
This item allows more than two frequency to be supported.
Configuration options: [Auto] [Disabled] [Enabled]
Turbo Mode
This item allows you to automatically set the CPU cores to run faster than the base
operating frequency when it is below the operating power, current and temperature
specification limit.
Configuration options: [Disabled] [Enabled]
CPU C-states
This item allows you to set the power saving of the CPU states.
Configuration options: [Auto] [Disabled] [Enabled]




3-12 Chapter 3: BIOS Setup
3.6.3 System Agent (SA) Configuration
The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor.


3.6.4 PCH Configuration
The items in this menu allow you to adjust the PCH PCI Express speed.

PCI Express Configuration
This item allows you to configure the PCI Express slots.
PCIe Speed
This item allows your system to automatically select the PCI Express port speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]


3.6.5 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.

SATA Controller(s)
This item allows you to enable or disable the SATA Device.
Configuration options: [Enabled] [Disabled]

The following items appear only when SATA Controller(s) is set to [Enabled].


SATA Mode Selection
This item allows you to set the SATA configuration.




Chapter 3
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to
use the AHCI (Advanced Host Controller Interface). The
AHCI allows the onboard storage driver to enable advanced
Serial ATA features that increases storage performance
on random workloads by allowing the drive to internally
optimize the order of commands.
[ntel RST With Intel Optane
I Set to [Intel RST With Intel Optane System Acceleration]
System Acceleration] when you want to enable the Intel Optane System
Acceleration.

SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks.
Configuration options: [On] [Off]




ROG STRIX B360-G GAMING 3-13
SATA6G_1(Black) - SATA6G_6(Black)
SATA6G_1(Black) - SATA6G_6(Black)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode Selection is set to [AHCI] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]


3.6.6 PCH-FW Configuration
This item allows you to configure the firmware TPM.


3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]

Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]

RGB LED lighting
Chapter 3




When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]


3.6.8 APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]




3-14 Chapter 3: BIOS Setup
3.6.9 USB Configuration
The items in this menu allow you to change the USB-related features.

The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.


USB Single Port Control
This item allows you to enable or disable the individual USB ports.

Refer to section 1.1.2 Motherboard layout for the location of the USB ports.




3.6.10 Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.


3.6.11 HDD/SSD SMART Information
The items in this menu display the SMART information of the connected devices.

NVM Express devices do not support SMART information.




3.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change




Chapter 3
the fan settings.
Qfan Configuration
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
AIO PUMP Control
[Disabled] Disable the Water Pump control feature.
[Auto] Detects the type of water pump installed and automatically switches
the control modes.
[DC mode] Enable the Water Pump control in DC mode for 3-pin chassis fan.
[PWM mode] Enable the Water Pump control in PWM mode for 4-pin chassis fan.




ROG STRIX B360-G GAMING 3-15
3.8 Boot menu
The Boot menu items allow you to change the system boot options.

Boot Configuration
Setup Mode
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after
POST.
[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM
[Auto] The system automatically detects the bootable devices and the add-
on devices.
[Enabled] For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows® UEFI mode.
[Disabled] Disable the CSM to fully support the non-UEFI driver add-on devices
or the Windows® UEFI mode.

The following items appear only when you set the Launch CSM to [Enabled].

Boot Devices Control
This item allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OPROM] [Legacy OPROM only]
[UEFI only]
Boot from Network Devices
Chapter 3




This item allows you to select the type of network devices that you want to
launch.
Configuration options: [Ignore] [Legacy only] [UEFI driver first]
Boot from Storage Devices
This item allows you to select the type of storage devices that you want to
launch.
Configuration options: [Ignore] [Legacy only] [UEFI driver first]
Boot from PCI-E/PCI Expansion Devices
This item allows you to select the type of PCI-E/PCI expansion devices that
you want to launch.
Configuration options: [Legacy only] [UEFI driver first]

Secure Boot
This item allows you to configure the Windows® Secure Boot settings and manage its keys to
protect the system from unauthorized access and malwares during POST.




3-16 Chapter 3: BIOS Setup
Fast Boot
[Disabled] Allows your system to go back to its normal boot speed.
[Enabled] Allows your system to accelerate the boot speed.

The following items appear only when you set the Fast Boot to [Enabled].


Next Boot after AC Power Loss
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.

Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.

• To access Windows® OS in Safe Mode, press after POST (Windows® 8 not
supported).

• To select the boot device during system startup, press when the ASUS Logo
appears.


Boot Override
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.



3.9 Tool menu


Chapter 3
The Tool menu items allow you to configure options for special functions. Select an item then
press to display the submenu.

Setup Animator
This item allows you to enable or disable the Setup animator.
Configuration options: [Enabled] [Disabled]

3.9.1 ASUS EZ Flash 3 Utility
This item allows you to run ASUS EZ Flash 3. When you press , a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then press
to confirm your choice.

For more details, refer to section 3.11.2 ASUS EZ Flash 3.




ROG STRIX B360-G GAMING 3-17
3.9.2 ASUS Secure Erase
SSD speeds may lower over time as with any storage medium due to data processing.
Secure Erase completely and safely cleans your SSD, restoring it to factory performance
levels.

Secure Erase is only available in AHCI mode. Ensure to set the SATA mode to AHCI. Click
Advanced > PCH Storage Configuration > SATA Mode Selection > AHCI.

To launch Secure Erase, click Tool > Secure Erase on the Advanced mode menu.


Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may
become unstable if you run Secure Erase on an incompatible SSD.



The time to erase the contents of your SSD may take a while depending on its size. Do not
turn off the system during the process.




Displays the
available SSDs
Chapter 3




Status definition:

• Frozen. The frozen state is the result of a BIOS protective measure. The BIOS
guards drives that do not have password protection by freezing them prior to booting.
If the drive is frozen, a power off or hard reset of your PC must be performed to
proceed with the Secure Erase.

• Locked. SSDs might be locked if the Secure Erase process is either incomplete
or was stopped. This may be due to a third party software that uses a different
password defined by ASUS. You have to unlock the SSD in the software before
proceeding with Secure Erase.




3-18 Chapter 3: BIOS Setup
3.9.3 ASUS User Profile
This item allows you to store or load multiple BIOS setting profiles.

Load Profile
This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the
profile number that saved your BIOS settings, press , and then select Yes.

• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!

• We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.


Profile Name
This item allows you to key in a profile name.

Save to Profile
This item allows you to save the current BIOS settings to the BIOS Flash, and create a
profile. Key in a profile number from one to eight, press , and then select Yes.

Load/Save Profile from/to USB Drive
This item allows you to load or save profile from your USB drive, load and save profile to your
USB drive.


3.9.4 ASUS SPD Information
This item allows you to view the DRAM SPD information.




Chapter 3
3.9.5 Event Log
This item allows you to view the event logs in setup.


3.9.6 Graphics Card Information
This item displays the information about the graphics card installed in your system.

GPU Post
This item displays the information and recommended configuration for the PCIE slots that the
graphics card is installed in your system.

This feature is only supported on selected ASUS graphics cards.


Bus Interface
This item allows you to select the bus interface.
Configuration options: [PCIEX16_1] [PCIEX16_2]




ROG STRIX B360-G GAMING 3-19
3.10 Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press , a confirmation window appears.
Select OK to load the default values.

Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press ,
a confirmation window appears. Select OK to save changes and exit.

Discard Changes and Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press , a confirmation window appears. Select Yes to
discard changes and exit.

Launch EFI Shell from USB drives
This item allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available filesystem devices.


3.11 Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility,and performance. However, BIOS updating is potentially risky. If
there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the
Chapter 3




instructions in this chapter to update your BIOS when necessary.

Visit http://www.asus.com to download the latest BIOS file for this motherboard.

The following utilities allow you to manage and update the motherboard BIOS setup program.
1. EZ Update: Updates the BIOS in Windows® environment.
2. ASUS EZ Flash 3: Updates the BIOS using a USB flash drive.
3. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a
USB flash drive when the BIOS file fails or gets corrupted.

3.11.1 EZ Update
The EZ Update is a utility that allows you to update the motherboard BIOS in Windows®
environment.

• EZ Update requires an Internet connection either through a network or an ISP
(Internet Service Provider).

• This utility is available in the support DVD that comes with the motherboard package.




3-20 Chapter 3: BIOS Setup
3.11.2 ASUS EZ Flash 3
ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet
without having to use a bootable floppy disk or an OS‑based utility.

Updating through the Internet varies per region and Internet conditions. Check your local
Internet connection before updating through the Internet.



To update the BIOS by USB:
1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press .
2. Insert the USB flash disk that contains the latest BIOS file to the USB port.
3. Select via Storage Device(s).




4. Press to switch to the Drive field.
5. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,




Chapter 3
and then press .
6. Press to switch to the Folder Info field.
7. Press the Up/Down arrow keys to find the BIOS file, and then press to perform
the BIOS update process. Reboot the system when the update process is done.




ROG STRIX B360-G GAMING 3-21
• This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!



Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.


To update the BIOS by Internet:
1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press .
2. Select via Internet.




3. Press the Left/Right arrow keys to select an Internet connection method, and then
press .
Chapter 3




4. Follow the onscreen instructions to complete the update.
5. Reboot the system when the update process is done.

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.




3-22 Chapter 3: BIOS Setup
3.11.3 ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.

The BIOS file in the motherboard support DVD may be older than the BIOS file published
on the ASUS official website. If you want to use the newer BIOS file, download the file at
https://www.asus.com/support/ and save it to a USB flash drive.


Recovering the BIOS
To recover the BIOS:
1. Turn on the system.
2. Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
3. The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 3 automatically.
4. The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure
system compatibility and stability, we recommend that you press to load default
BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!




Chapter 3




ROG STRIX B360-G GAMING 3-23
Chapter 3




3-24 Chapter 3: BIOS Setup
Appendix




Appendix

Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Appendix




ROG STRIX B360-G GAMING A-1
Compliance Statement of Innovation, Science and Economic
Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)

Déclaration de conformité de Innovation, Sciences et
Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
CAN ICES-3(B)/NMB-3(B)

VCCI: Japan Compliance Statement
Class B ITE




KC: Korea Warning Statement
Appendix




A-2 Appendix
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.



DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.


ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.

Regional notice for California


WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Google™ License Terms
Copyright© 2018 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file
except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the
Appendix




License.




ROG STRIX B360-G GAMING A-3
English ASUSTeK Computer Inc. hereby declares that this device is in Română ASUSTeK Computer Inc. declară că acest dispozitiv se conformează
compliance with the essential requirements and other relevant provisions of cerinţelor esenţiale şi altor prevederi relevante ale directivelor conexe. Textul
related Directives. Full text of EU declaration of conformity is available at: complet al declaraţiei de conformitate a Uniunii Europene se găseşte la:
www.asus.com/support www.asus.com/support
Français AsusTek Computer Inc. déclare par la présente que cet appareil est Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti
conforme aux critères essentiels et autres clauses pertinentes des directives sa osnovnim zahtevima i drugim relevantnim odredbama povezanih
concernées. La déclaration de conformité de l’UE peut être téléchargée à Direktiva. Pun tekst EU deklaracije o usaglašenosti je dostupan da adresi:
partir du site Internet suivant : www.asus.com/support www.asus.com/support
Deutsch ASUSTeK Computer Inc. erklärt hiermit, dass dieses Gerät mit Slovensky Spoločnosť ASUSTeK Computer Inc. týmto vyhlasuje, že toto
den wesentlichen Anforderungen und anderen relevanten Bestimmungen zariadenie vyhovuje základným požiadavkám a ostatým príslušným
der zugehörigen Richtlinien übereinstimmt. Der gesamte Text der EU- ustanoveniam príslušných smerníc. Celý text vyhlásenia o zhode pre štáty EÚ
Konformitätserklärung ist verfügbar unter: www.asus.com/support je dostupný na adrese: www.asus.com/support
Italiano ASUSTeK Computer Inc. con la presente dichiara che questo Slovenščina ASUSTeK Computer Inc. izjavlja, da je ta naprava skladna z
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni pertinenti bistvenimi zahtevami in drugimi ustreznimi določbami povezanih direktiv.
con le direttive correlate. Il testo completo della dichiarazione di conformità Celotno besedilo EU-izjave o skladnosti je na voljo na spletnem mestu:
UE è disponibile all’indirizzo: www.asus.com/support www.asus.com/support
Русский Компания ASUS заявляет, что это устройство соответствует Español Por la presente, ASUSTeK Computer Inc. declara que este dispositivo
основным требованиям и другим соответствующим условиям cumple los requisitos básicos y otras disposiciones pertinentes de las
соответствующих директив. Подробную информацию, пожалуйста, directivas relacionadas. El texto completo de la declaración de la UE de
смотрите на www.asus.com/support conformidad está disponible en: www.asus.com/support
Български С настоящото ASUSTeK Computer Inc. декларира, че това Svenska ASUSTeK Computer Inc. förklarar härmed att denna
устройство е в съответствие със съществените изисквания и другите enhet överensstämmer med de grundläggande kraven och andra
приложими постановления на свързаните директиви. Пълният текст на relevanta föreskrifter i relaterade direktiv. Fulltext av EU-försäkran om
декларацията за съответствие на ЕС е достъпна на адрес: överensstämmelse finns på: www.asus.com/support
www.asus.com/support Українська ASUSTeK Computer Inc. заявляє, що цей пристрій відповідає
Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan основним вимогам та іншим відповідним положенням відповідних
s bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva. Директив. Повний текст декларації відповідності стандартам ЄС
Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support доступний на: www.asus.com/support
Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že toto Türkçe AsusTek Computer Inc., bu aygıtın temel gereksinimlerle ve ilişkili
zařízení splňuje základní požadavky a další příslušná ustanovení souvisejících Yönergelerin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder. AB
směrnic. Plné znění prohlášení o shodě EU je k dispozici na adrese: uygunluk bildiriminin tam metni şu adreste bulunabilir:
www.asus.com/support www.asus.com/support
Dansk ASUSTeK Computer Inc. erklærer hermed, at denne enhed er i Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen
overensstemmelse med hovedkravene og andre relevante bestemmelser i de sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva.
relaterede direktiver. Hele EU-overensstemmelseserklæringen kan findes på: Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support
www.asus.com/support
Nederlands ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat
voldoet aan de essentiële vereisten en andere relevante bepalingen van
de verwante richtlijnen. De volledige tekst van de EU-verklaring van
conformiteit is beschikbaar op: www.asus.com/support
Eesti Käesolevaga kinnitab ASUSTeK Computer Inc, et see seade vastab
asjakohaste direktiivide oluliste nõuetele ja teistele asjassepuutuvatele
sätetele. EL vastavusdeklaratsiooni täielik tekst on saadaval järgmisel
aadressil: www.asus.com/support
Suomi ASUSTeK Computer Inc. ilmoittaa täten, että tämä laite on
asiaankuuluvien direktiivien olennaisten vaatimusten ja muiden tätä
koskevien säädösten mukainen. EU-yhdenmukaisuusilmoituksen koko teksti
on luettavissa osoitteessa: www.asus.com/support
Ελληνικά Με το παρόν, η AsusTek Computer Inc. δηλώνει ότι αυτή η
συσκευή συμμορφώνεται με τις θεμελιώδεις απαιτήσεις και άλλες σχετικές
διατάξεις των Οδηγιών της ΕΕ. Το πλήρες κείμενο της δήλωσης συμβατότητας
είναι διαθέσιμο στη διεύθυνση: www.asus.com/support
Magyar Az ASUSTeK Computer Inc. ezennel kijelenti, hogy ez az eszköz
megfelel a kapcsolódó Irányelvek lényeges követelményeinek és egyéb
vonatkozó rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövege
innen letölthető: www.asus.com/support
Latviski ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst saistīto
Direktīvu būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem.
Pilns ES atbilstības paziņojuma teksts pieejams šeit: www.asus.com/support
Lietuvių „ASUSTeK Computer Inc.“ šiuo tvirtina, kad šis įrenginys atitinka
pagrindinius reikalavimus ir kitas svarbias susijusių direktyvų nuostatas. Visą
ES atitikties deklaracijos tekstą galima rasti: www.asus.com/support
Norsk ASUSTeK Computer Inc. erklærer herved at denne enheten er i
samsvar med hovedsaklige krav og andre relevante forskrifter i relaterte
direktiver. Fullstendig tekst for EU-samsvarserklæringen finnes på:
Appendix




www.asus.com/support
Polski Firma ASUSTeK Computer Inc. niniejszym oświadcza, że
urządzenie to jest zgodne z zasadniczymi wymogami i innymi właściwymi
postanowieniami powiązanych dyrektyw. Pełny tekst deklaracji zgodności UE
jest dostępny pod adresem: www.asus.com/support
Português A ASUSTeK Computer Inc. declara que este dispositivo está em
conformidade com os requisitos essenciais e outras disposições relevantes
das Diretivas relacionadas. Texto integral da declaração da UE disponível em:
www.asus.com/support




A-4 Appendix
ASUS contact information

ASUSTeK COMPUTER INC.
Address 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site www.asus.com

Technical Support
Telephone +86-21-38429911
Fax +86-21-5866-8722, ext. 9101#
Online support https://www.asus.com/support/Product/ContactUs/
Services/questionform/?lang=en

ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site http://www.asus.com/us/

Technical Support
Support fax +1-812-284-0883
Telephone +1-812-282-2787
Online support https://www.asus.com/support/Product/ContactUs/
Services/questionform/?lang=en-us

ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, 40880 Ratingen, Germany
Fax +49-2102-959931
Web site http://www.asus.com/de
Online contact http://eu-rma.asus.com/sales

Technical Support
Telephone +49-2102-5789555
Support Fax +49-2102-959911
Online support h
 ttps://www.asus.com/support/Product/ContactUs/
Services/questionform/?lang=de-de
Appendix




ROG STRIX B360-G GAMING A-5
DECLARATION OF CONFORMITY
Compliance Information Statement
Per FCC Part 2 Section 2. 1077(a)




Responsible Party Name: Asus Computer International

Address: 800 Corporate Way, Fremont, CA 94539.

Phone/Fax No: (510)739-3777/(510)608-4555

hereby declares that the product

Product Name : Motherboard

Model Number : ROG STRIX B360-G GAMING



Conforms to the following specifications:

FCC Part 15, Subpart B, Unintentional Radiators

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Appendix




A-6 Appendix


ASUS ROG Strix B360-G Gaming im Preisvergleich

4 Angebote ab 90€ bis 112,9€
PreisAnbieterStatusInformation
€ 90
Zum Shop
Amazon.de
Amazon.de
Gewöhnlich versandfertig in 24 Stunden
Prime!
€ 107,95
Zum Shop
Mindfactory DE
Mindfactory DE
Auf Lager
Lieferzeit: 1-3 Werktage
Versand: € 8,99
Asus ROG Strix B360-G Gaming Intel B360 So.1151 Dual Channel DDR4 mATX Retail
Artikelnummer: 8850284

€ 111,9
Zum Shop
Idealo DE
Idealo DE
Auf Lager
Versand: € 5,95
Asus ROG Strix B360-G Gaming
Artikelnummer: 6108054

€ 112,9
Zum Shop
Alternate DE
Alternate DE
Auf Lager
Lieferzeit: 3
ROG STRIX B360-G GAMING, Mainboard
Artikelnummer: 1440224

Alle Preise inkl. Mehrwertsteuer, ggfs. zzgl. Versandkosten. Alle Angaben ohne Gewähr.
* Letzte Preis/Verfügbarkeits Aktualisierung liegt länger zurück, möglicherweise ausverkauft.